Connectivity Guide

Table 416. Controller Copy Back Mode(continued)
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.71
Description The current copy back mode setting for the controller. Possible values:
1. Not one of the following.
2. Not supported on this controller.
3. Disks assigned as spares could revert back to spare status.
4. Data from physical disk participating in a virtual disk could be automatically copied to the
assigned hot spare in case former has a predictive failure event.
5. Copyback mode is disabled
Syntax INTEGER
Access read-only
Table 417. Controller Security Status
Name
controllerSecurityStatus
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.72
Description The controller's current security/encryption status. Possible values:
1. The current status could not be determined.
2. Controller is not operating in an encryption mode.
3. Controller is operating in the Local Key Management (LKM) encryption mode.
Syntax INTEGER
Access read-only
Table 418. Controller Encryption Key Present
Name
controllerEncryptionKeyPresent
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.73
Description Indicates whether encryption key is assigned for the controller.
Syntax BooleanType
Access read-only
Table 419. Controller Encryption Capability
Name
controllerEncryptionCapability
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.74
Description The type of encryption supported by the controller. Possible values:
1. Not one of the following.
2. No encryption supported.
3. Local Key Management.
Syntax INTEGER
Access read-only
Table 420. Controller Load Balance Setting
Name
controllerLoadBalanceSetting
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.75
Description The ability of the controller to automatically use both controller ports (or connectors)
connected to the same enclosure in order to route I/O requests. Possible values:
iDRAC MIB 95