Connectivity Guide

Battery Table
The objects provide information about the Battery storage group.
NOTE: The Storage Details Group is introduced in VRTX CMC from this release. The iDRAC and CMC have the same
Storage attributes with some modification in CMC. The Object ID mentioned example:
1.3.6.1.4.1.674.10892. 5.5 .1.20.130.15.1.1 for the table group are attributes for checking on iDRAC. To check the
corresponding set of attributes for VRTX CMC systems, use the Object ID example:
1.3.6.1.4.1.674.10892. 2.6 .1.20.130.15.1.1.
Table 389. Battery Number
Name
batteryNumber
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.1
Description Instance number of this battery entry.
Syntax INTEGER
Access read-only
Table 390. Battery State
Name
batteryState
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.4
Description Current state of battery. Possible values:
1. The current state could not be determined.
2. The battery is operating normally.
3. The battery has failed and needs to be replaced.
4. The battery temperature is high or charge level is depleting.
5. The battery is missing or not detected.
6. The battery is undergoing the re-charge phase.
7. The battery voltage or charge level is below the threshold.
Syntax INTEGER
Access read-only
Table 391. Battery Component Status
Name
batteryComponentStatus
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.6
Description The status of the battery itself without the propagation of any contained component status.
Possible values:
1. Other
2. Unknown
3. OK
4. Non-critical
5. Critical
6. Non-recoverable
Syntax ObjectStatusEnum
Access read-only
Table 392. Battery Predicted Capacity
Name
batteryPredictedCapacity
iDRAC MIB 89