Connectivity Guide
iDRAC MIB
The Integrated Dell Remote Access Controller (iDRAC) MIB (filename iDRAC-SMIv1.mib/ iDRAC-SMIv2.mib) is the MIB supported by
the Integrated Dell Remote Access Controller 7 and later versions (iDRAC7, iDRAC8 and iDRAC9). This MIB provides management data
that allows you to monitor devices and software on a system via an out-of-band connection to the iDRAC7 and later of a system.
NOTE: From iDRAC7 firmware release r1.30.30 or later, the iDRAC7 and later MIB file is published in both types of SMI
(Structure of Managed Information) notations: SMIv1 and SMIv2. The SMIv1 copy of the iDRAC7 and later MIB file is
named iDRAC-SMIv1.mib. And the SMIv2 copy is named iDRAC-SMIv2.mib. Prior to iDRAC7 firmware release r1.30.30,
only a SMIv1 copy was published. And the file name of the SMIv1 copy was iDRAC-MIB.txt.
Topics:
• Supported Systems
• iDRAC Supported SNMP Versions
• iDRAC SNMP Data Security Features
• iDRAC Out-of-Band Group
• iDRAC Traps
Supported Systems
The iDRAC MIB supported on the following systems for this release:
Blade Servers
The Blade servers for this release:
• PowerEdge M830
• PowerEdge FC430
Rack and Tower Servers
The Rack and Tower servers for this release:
• PowerEdge R930
• PowerEdge R530xd
• C6320
• PowerEdge FX2/FX2s 1.2
• PowerEdge FD332
• DSS 2500
• DSS 1500
iDRAC Supported SNMP Versions
The following table identifies the SNMP versions that support iDRAC for the given SNMP operations.
Table 268. iDRAC Supported SNMP Versions
SNMP Operations Supported SNMP version
GET, GETNEXT, GETBULK SNMP v1, v2c and v3
TRAP SNMP v1, SNMP v2c and SNMP v3
4
iDRAC MIB 65