Connectivity Guide

Table 2. Managed Object Used in This Document
MIB Name Agent / Hardware Supported Purpose of the MIB
10892.mib Server Administrator Provides the information about the systems monitored by
Server Administrator instrumentation software. This is the
primary MIB for PowerEdge systems.
dcs3fru.mib Server Administrator Provides the information about the system Field
Replaceable Unit (FRU) to SNMP management
applications.
dcstorag.mib Server Administrator Storage
Management
Provides the information about the storage hardware
components and RAID configurations monitored by Server
Administrator.
iDRAC-SMIv1.mib iDRAC7 and later Provides information about the SNMP data and traps
supported by iDRAC7 and later. This is the SMIv1 version
of the iDRAC MIB.
iDRAC-SMIv2.mib iDRAC7 and later Provides information about the SNMP data and traps
supported by iDRAC7 and later. This is the SMIv2 version
of the iDRAC MIB.
dcs3rmt.mib Dell Remote Access controller 5 (DRAC 5) Provides information about remote access components
monitored by the Server Administrator Remote Access
Service.
rac_host.mib Remote access out-of-band agent Provides information about the components monitored by
the remote access out-of-band software agent.
DELL-RAC-MIB.txt Chassis Management Controller (CMC) Provides information about components monitored by the
Chassis Management Controller for modular chassis. This
MIB is the legacy iDRAC MIB. Changes made in this MIB
are not for iDRAC. iDRAC does not support all the objects
and traps defined in this MIB. The new and more extensive
iDRAC MIB is available for iDRAC7 and later versions.
DcAsfSrv.mib Baseboard Management Controller (BMC) Provides information about server Platform Event Traps
generated by the Baseboard Management Controller.
For further details see Release Notes for Management Information Base readme_mibs.txt.
Server Administrator Remote Access MIB
NOTE: This section contains information that is applicable only if the Server Administrator is installed in the system.
The Server Administrator Remote Access MIB ( filename dcs3rmt.mib ) provides in-band information about remote access hardware
that may be present in your system.
The Server Administrator Remote Access MIB structures its MIB objects into groups of scalar objects or MIB tables that provide related
information. Table below describes each Server Administrator Remote Access MIB group and lists the MIB group number assigned to the
MIB group. The Server Administrator Remote Access MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB group
number> where <MIB group number> is the MIB group number assigned to the MIB group. See the relevant section for more information
about the MIB objects defined in a MIB group.
Table 3. Server Administrator Remote Access MIB Sections in This Guide
Topic MIB Group Numbers
Remote Access Group —
provides information about
remote access hardware
that may be present in your
system and defines
variables for administrative
users, SNMP trap
1700
6 Introduction