Connectivity Guide

Table 497. Virtual Disk Failover Controller (continued)
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.44
Description Indicates the Fully Qualified Device Descriptor (FQDD) of the current active
controller.
Syntax FQDDString
Access read-only
NOTE: This attribute is applicable for VRTX CMC only.
Enclosure Table
The objects provide information about the Enclosure Table group in storage.
NOTE: The Storage Details Group is introduced in VRTX CMC from this release. The iDRAC and CMC have the same
Storage attributes with some modification in CMC. The Object ID mentioned example:
1.3.6.1.4.1.674.10892. 5.5 .1.20.130.3.1.1 for the table group are attributes for checking on iDRAC. To check the
corresponding set of attributes for VRTX CMC systems, use the Object ID example:
1.3.6.1.4.1.674.10892. 2.6 .1.20.130.3.1.1.
Table 498. Enclosure Number
Name
enclosureNumber
Object Id 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.1
Description Instance number of this enclosure/backplane.
Syntax INTEGER
Access not-Accessible
Table 499. Enclosure Name
Name
enclosureName
Object Id 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.2
Description The enclosure/backplane's name as represented in Storage Management.
Syntax DisplayString
Access read-only
Table 500. Enclosure State
Name
enclosureState
Object Id 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.4
Description The current state of this enclosure/backplane. Possible states:
1. The current state could not be determined.
2. The enclosure is operating normally.
3. The enclosure has encountered a hardware problem or is not responding.
4. The enclosure is no longer connected to the controller or there exists a problem
communicating to the enclosure.
5. The enclosure is unstable.
6. The enclosure is inactive due to being configured by another controller.
7. The enclosure is offline and inAccessible.
8. The enclosure is online and Accessible.
9. The enclosure is currently blocked by another controller.
114 iDRAC MIB