Users Guide

Properties Description
controllers and PCIe SSD subsystems attached to the system
starting with zero. This number is the same as the PCIe SSD
subsystem ID number reported by the omreportcommand. For
information on Command Line Interface, see the Server
Administrator Command Line Interface User's Guide.
NOTE: In CLI commands, the PCIe SSD subsystem ID is
displayed as the controller ID.
Status These icons represent the severity or health of the PCIe SSD
Subsystem.
— Normal/OK
— Warning/Non-critical
— Critical/Failure/Error
Name Displays the name of the subsystem.
Slot ID
Displays the slot to which the PCIe SSD subsystem is attached.
NOTE: If Not Applicable is displayed, you can identify
the Slot ID by selecting the System > Main > Systems
Chassis > Slots object in the tree view and clicking the
Information tab. The Slot ID property on this tab may
display the correct information.
State Displays the status of the subsystem. Possible values are:
• Ready — The subsystem is functioning normally.
• Degraded — The subsystem has encountered a failure and is
operating in a degraded state.
• Failed — The subsystem has encountered a failure and is no
longer functioning.
Number of Extender Cards Displays the number of extender cards in the subsystem. Each
extender card can be attached to physical disks or an enclosure.
The extender card must be a PCIe SSD port.
Available Reports Allows you to view the Slot Occupancy report. For more
information, see Available Reports.
Physical Device Properties
You can view information about PCIe SSDs and perform PCIe SSD tasks on the Physical Device Properties page. To view the complete
PCIe SSD properties, click Full View on the top of the page. For more information, see Physical Device Tasks.
The following table lists the physical device properties for PCIe SSD.
Table 4. Physical Device Properties
Properties Description
Name Displays the name of the PCIe SSD. The name comprises the bay
ID and the slot in which the PCIe SSD is installed.
State Displays the health state of the PCIe SSD.
Bus Protocol Displays the technology that the PCIe SSD is using.
Device Protocol Displays the device protocol of the physical device, such as Non-
Volatile Memory Express (NVMe).
Media Displays the media type of the physical disk.
PCI Express Solid-State Device Support 31