Reference Guide

Property Description Data Type
ResetCounters Is the function used to reset the peak
readings.
uint 32
powerCapSetting This refers to the user configured power
setting.
uint 16
instHeadroom This refers to the instantaneous headroom. uint 32
peakHeadRoom Is the function used to set the power
budget.
uint 32
DCIM_OEM_DataAccessModule
The DCIM_OEM_DataAccessModule class is derived from the CIM_ManagedElement class. This class models hardware information
in a proprietary format.
The following table describes the property, description, and data type details for the DCIM OEM DataAccessModule.
Class Name: DCIM_OEM_DataAccessModule
Parent Class: CIM_ManagedElement
Table 75. DCIM OEM DataAccessModule
Property Description Data Type
InstanceID Identifies the instance. string
GlobalStatus Represents the global health status of the
system. This property can have the following
values:
0 - Other
1 - Unknown
2 - OK
3 - Warning / Non-Critical
4 - Critical
5 - Non-Recoverable
.. - Reserved
NOTE: GlobalStatus property is
available only for Linux systems.
sint32
SendCmd The SendCmd method is used to invoke
proprietary hardware management operation.
string
iDRACIPv4 Provides Remote Access controller (iDRAC )
IPv4 address.
string
iDRACIPv6 Provides Remote Access controller (iDRAC )
IPv6 address.
string
72 Dell-Defined Classes