Reference Guide
Property Description Data Type
• 5 - In Use and Available/Shareable
CIM_RedundancyGroup
The CIM_RedundancyGroup class described in Table properties below is a set of components that provide more instances of a critical
component than are required for the system’s operation. The extra components are used in case of critical component failure. For
example, multiple power supplies allow a working power supply to take over when another power supply has failed.
The following table describes the property, description, and data type details for the CIM RedundancyGroup.
Class Name: CIM_RedundancyGroup
Parent Class: CIM_LogicalElement
Table 52. CIM_RedundancyGroup Properties
Property Description Data Type
CreationClassName See Common Properties of Classes string
Name Serves as the key for the redundancy
group’s instance in an enterprise
environment.
string
RedundancyStatus Provides information on the state of the
redundancy group. Values for the
RedundancyStatus property are as
follows:
0- Unknown
1- Other
2- Fully redundant. Fully redundant - all of
the configured redundancy is still available.
3 - Degraded redundancy. Degraded
redundancy - that some failures have been
experienced but some reduced amount of
redundancy is still available.
4 - Redundancy lost. Redundancy lost - that
a sufficient number of failures have
occurred so that no redundancy is available
and the next failure experienced causes
overall failure.
uint16
CIM_ExtraCapacityGroup
CIM_LogicalElement
57