Reference Guide

CIM_PCIDevice
The CIM_PCIDevice class shown in Table below describes the capabilities and management of a PCI device controller on an adapter
card.
The following table describes the properties and data type of the CIM PCI Device class.
Class Name: CIM_PCIDevice
Parent Class: CIM_PCIController
Table 38. CIM_PCIDevice Properties
Property Description Data Type
BaseAddress Identifies an array of up to six double-word
base memory addresses.
uint32
SubsystemID Identifies a subsystem identifier code. uint16
SubsystemVendorID Identifies a subsystem vendor ID. ID
information is reported from a PCI device via
protocol-specific requests. This information is
also present in the CIM_PhysicalElement
class (the manufacturer property) for
hardware, and the CIM_Product class (the
vendor property) for information related to
product acquisition.
uint16
ExpansionROMBaseAddress Identifies a double-word expansion ROM base
memory address.
uint32
CIM_PCIBridge
The CIM_PCIBridge class described in PCIBridge Properties describes the capabilities and management of a PCI controller providing
bridge-to-bridge capability. An example is a PCI to Industry-Standard Architecture (ISA) bus bridge.
The following table describes the properties and data type of the CIM PCI Bridge class.
Class Name: CIM_PCIBridge
Parent Class: CIM_PCIController
42
CIM_LogicalElement