Reference Guide

CIM_PCIController
The CIM_PCIController class described in Table below contains a set of devices that follow the Peripheral Component Interconnect
(PCI) protocol defined by the Personal Computer Memory Card International Association (PCMCIA). The PCI protocol defines how data is
transferred between devices. The CIM_PCIController class contains PCI adapters and bridges.
The following table describes the properties and data type of the CIM PCI Controller class.
Class Name: CIM_PCIController
Parent Class: CIM_Controller
Table 37. CIM_PCIController Properties
Property Description Data Type
CommandRegister The current contents of the register that
provide basic control over the device’s
ability to respond to, and/or perform PCI
accesses. The data in the capabilities array
is gathered from the PCI status register and
the PCI capabilities list as defined in the PCI
specification.
Values for the CommandRegister
property are:
0 — Unknown
1 — Other
2 — Supports 66 MHz
3 — Supports user-definable features
4 — Supports fast back-to-back
transactions
5 — PCI-X capable
6 — PCI power management supported
7 — Message signaled interrupts supported
8 — Parity error recovery capable
9 — AGP supported
10 — Vital product data supported
11 — Provides slot identification
12 — Hot swap supported
uint16
CIM_LogicalElement 41