CLI Guide

name=value pair 1 name=value pair 2 Description
backup XML file is available in the
mentioned locations.
attribute=logallsensors setting=Enable|Disable Enabling the command allows you to log all
unmonitored ESM sensor events in to Alert
log, OS log, and generates the SNMP traps.
attribute=produselog setting=Enable|Disable Enabling the command tracks actions
performed on the Server Administrator. The
maximum size of the logfile is 4 MB.
An example command set only to remove the critical severities is as follows:
omconfig preferences logging attribute=oslogfilter logcrit=false
An example command set to enable the automatic backup of ESM logs.
omconfig preferences logging attribute=archiveesmlog setting=Enable
An example command set to enable the Log All ESM Sensor Events.
omconfig preferences logging attribute=logallsensors setting=Enable
An example command to set the Product Use Feedback.
omconfig preferences logging attribute=produselog setting=Enable logsize=4
Omconfig preferences webserver
Use the omconfig preferences webserver command to set the encryption levels of the Server Administrator web server, configure the
URL launch point in the Server Administrator web server environment, and to set the JRE version for the Server Administrator.
The following table displays the name=value pairs you can use with this command:
Table 64. Valid Parameters Of Omconfig Preferences Webserver
name=value pair 1 name=value pair 2 Description
attribute=sslencryption setting=autonegotiate | 128bitorhigher
autonegotiate: Sets the encryption levels
automatically based on your web browser
settings.
128bitorhigher: Sets the encryption levels to
128-bit or higher.
NOTE: This attribute is deprecated in
the future releases, use ciphers
instead.
attribute=seturl host=<string> port=<value>
Enables you to configure the Distributed Web
Server (DWS) URL launch point, for
accessing the management node. This
command is used when Server Administrator
Instrumentation Service and Remote
Enablement are installed on the same system
and the Server Administrator GUI is accessed
using the DWS URL.
NOTE: This command is not
supported if the web server is
present on the same system.
attribute=signalgorithm setting=MD5 | SHA1 | SHA256 | SHA512
MD5: Sets the key signing algorithm to MD5.
SHA1: Sets the key signing algorithm to
SHA1.
90 Omconfig Managing Components Using The Instrumentation Service