CLI Guide

Omconfig Preferences Cdvformat

Use the omconfig preferences cdvformat to specify the delimiters for separating data fields reported in the custom delimited

format. The valid values for delimiters are: exclamation, semicolon, at, hash, dollar, percent, caret, asterisk, tilde, question, colon, comma,

and pipe.

The following example shows how to set the delimiter for separating data fields to asterisk:

omconfig preferences cdvformat delimiter=asterisk

Omconfig Preferences Dirservice

Use the omconfig preferences dirservice command to configure the Active Directory service. The <productname>oem.ini

file is modified to reflect these changes. If the "adproductname" is not present in the <productname>oem.ini file then a

<computername>-<computername> refers to the name of the computer running Server Administrator and <productname> refers to

the name of the product defined in omprv32.ini. For Server Administrator, the product name is "omsa".

Therefore, for a computer named "myOmsa" running Server Administrator, the default name is "myOmsa–omsa". This is the name of

Server Administrator defined in Active Directory by using the snap-in tool. This name must match the name for the application object in

Active Directory in order to find user privileges.

NOTE:

This command is applicable only on systems running the Windows operating system.

The following table displays the valid parameters for the command:

Table 60. Valid Parameters Of Omconfig Preferences Dirservice

name=value pair Description

prodname=<text> Specifies the product to which you want to apply the Active Directory configuration changes. prodname

refers to the name of the product defined in omprv32.ini. For Server Administrator, it is "omsa".

enable=<true | false>

true: Enables Active Directory service authentication support and the Active Directory Login option on the

false: Disables Active Directory service authentication support and the Active Directory Login option on the

accounts.

adprodname=<text> Specifies the name of the product as defined in the Active Directory service. This name links the product with

the Active Directory privilege data for user authentication.

Omconfig Preferences Messages

Use the omconfig preferences messages command to select the format of alert messages. The default format is

traditional, which is the legacy format.

The following table lists the parameters you can use with this command. For example, to set the message format to traditional use the

following command:

Table 61. Valid Parameters Of Configuring Preferences Messages

name=value pair 1 name=value pair 2 Description

attribute=format setting=traditional | enhanced

traditional: Sets the alert message to traditional format.

enhanced: Sets the alert message to Enhanced Event Messaging

format. This is similar to the format available in iDRAC7.

omconfig preferences messages attribute=format setting=traditional

Omconfig Managing Components Using The Instrumentation Service