CLI Guide

name=value pair 1
config=
name=value pair 2 Description
NOTE: For more information on
dracusergroup=custom, see Usage of
Dracusergroup=custom.
dracusergroup=none: Does not enable user privileges.
id=user id extipmiusergroup=admin |
operator | readonly | custom | none
NOTE: extipmiusergroup user
group is available only on Dell 10G
blade systems.
id=user id: User ID of the user being configured.
extipmiusergroup=admin: Enables the Administrator user
privileges.
extipmiusergroup=operator: Enables the Operator
privileges.
extipmiusergroup=readonly: Enables the Read Only
privileges.
extipmiusergroup=custom: Enables the Custom User
privileges.
NOTE: It is recommended that you use the operator
and readonly options for systems with iDRAC
Enterprise. For more information, see Usage of
Extipmiusergroup=custom.
extipmiusergroup=none: Does not enable user privileges.
Usage Of Dracusergroup
The following table displays the usage of dracusergroup=custom.
Table 56. Valid Parameters of omconfig chassis remoteaccess config=user id=<
user id > dracusergroup=custom or omconfig
mainsystem remoteaccess config=user id=< user id > dracusergroup=custom
name=value pair 1 name=value pair 2 name=value pair 3 Description
config=user id=user id
dracusergroup=custom
logindrac=true | false true or false: Enables or
disables logging into DRAC.
configuredrac=true | false true or false: Enables or
disables configuration of DRAC.
configure users=true | false true or false: Enables or
disables configuration of users.
clearlogs=true | false true or false: Enables or
disables log clearance.
executeservercommands=true |
false
true or false: Enables or
disables execution of server
commands.
accessconsoleredir=true | false true or false: Enables or
disables access to console
redirection.
accessvirtualmedia=true | false true or false: Enables or
disables access to virtual media.
testalerts=true | false true or false: Enables or
disables test alerts.
Omconfig Managing Components Using The Instrumentation Service 85