CLI Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Server Administrator Version 9.3.2

omconfig mainsystem fans index=0 minwarnthresh=4580 maxwarnthresh=9160

When you issue the command and the system sets the values you specify, the following message is displayed:

Fan probe warning threshold(s) set successfully.

Omconfig chassis frontpanel or omconfig mainsystem

frontpanel

Use the omconfig chassis frontpanel or omconfig mainsystem frontpanel command to:

• configure the power button and the Nonmasking Interrupt (NMI) button

• configure the LCD to display:

• No information

• Custom information

• Default system information

• Service tag, system name

• Remote access MAC addresses

• System power

• Remote access IP address

• Ambient temperature of the system

• Remote access IPv4 address

• Remote access IPv6 address

• Specify and configure the LCD line number

• View the encryption state report of the LCD

• Configure LCD to indicate an active remote session when the Kernel-based Virtual Machine (KVM) is available

NOTE:

You can configure the Power and NMI buttons only if they are present on the system.

The following table displays the valid parameters for the command:

Table 49. Valid Parameters Of Omconfig Chassis Frontpanel Or Omconfig Mainsystem Frontpanel

name=value pair 1 name=value pair 2 Description

lcdindex=<index> NA Specifies the LCD line number.

config=none | default | custom NA

• none: Sets the LCD text to none.

• default: Sets the LCD text to default.

• custom: Sets the LCD text to custom.

text=<custom text> NA Sets the custom text for LCD when

config=custom.

nmibutton=enable | disable NA

• enable: Enables the NMI button on the

system.

• disable: Disables the NMI button on the

system.

powerbutton=enable | disable NA

• true: Enables the Power button on the

system.

• false: Disables the Power button on the

system.

config=sysname NA Sets the name of the system.

config=syspower NA Sets the system power information.

config=servicetag NA Sets the system service tag information.

config=remoteaccessipv4 NA Sets the remote access IPv4 information.

Omconfig Managing Components Using The Instrumentation Service 73