CLI Guide

Group name=value pair 1 attribute= name=value pair 2 setting=

UEFI Boot Settings attribute=UefiBootSeq sequence=aliasname1, aliasname2,.....

aliasnameN

Omconfig Chassis Currents Or Omconfig Mainsystem

Currents

NOTE: This command is no longer available through Server Administrator.

Omconfig Chassis Fans Or Omconfig Mainsystem Fans

Use the omconfig chassis fans or omconfig mainsystem fans command to set fan probe warning thresholds. As with other

components, you can view both warning and failure threshold values, but you cannot set failure thresholds. The system manufacturer sets

the minimum and maximum failure thresholds.

Valid Parameters For Fan Warning Thresholds

The following table shows the valid parameters for setting fan warning thresholds:

Table 48. omconfig chassis fans or omconfig chassis fans

name=value pair Description

index= <n> Number of the probe or probe index (must specify).

warnthresh=default Sets minimum and maximum warning thresholds to default.

minwarnthresh=<n> Minimum warning threshold.

maxwarnthresh=<n> Maximum warning threshold.

Default minimum and maximum warning thresholds

NOTE:

Systems that contain ESM3, ESM4, and BMC capabilities do not allow you to set warning threshold values to

default values.

To set both the upper and lower fan warning threshold values to the recommended default value, type:

omconfig chassis fans index=0 warnthresh=default

omconfig mainsystem fans index=0 warnthresh=default

You cannot default one value and set another. In other words, if you default the minimum warning threshold value, you are also selecting

the default value for the maximum warning threshold value.

Specifying a value for minimum and maximum warning thresholds

If you prefer to specify values for the fan probe warning thresholds, you must specify the number of the probe you are configuring and the

minimum and/or maximum warning threshold values. In the following example, the probe that is being configured is probe 0. The first

command sets only the minimum threshold; the second sets the minimum and maximum thresholds:

omconfig chassis fans index=0 minwarnthresh=4580

omconfig mainsystem fans index=0 minwarnthresh=4580

omconfig chassis fans index=0 minwarnthresh=4580 maxwarnthresh=9160

Omconfig Managing Components Using The Instrumentation Service