CLI Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
System Information attribute=SysMfrContactInfo setting=<string>
attribute=SystemBiosVersion setting=<string>
attribute=SystemManufacturer setting=<string>
attribute=SystemModelName setting=<string>
attribute=SystemServiceTag setting=<string>
attribute=SystemMeVersion
NOTE: The option is supported only
on 13G and later systems.
setting=<string>
attribute=UefiComplianceVersion
NOTE: The option is supported only
on 13G and later systems.
setting=<string>
attribute=SystemCpldVersion setting=<string>
System Profile Settings attribute=MemFrequency setting=MaxPerf |1866MHz | 1600MHz |
1333MHz |1067MHz | 800MHz |
MaxReliability
attribute=MemPatrolScrub setting=Standard | Extended | Disabled
attribute=MemRefreshRate setting=1x | 2x
attribute=MemVolt
setting=AutoVolt | Volt15V | Volt135V
NOTE: Volt15V represents 1.5 Volt
and Volt135V represents 1.35 Volt
attribute=ProcC1E setting=Enabled | Disabled
attribute=ProcCStates setting=Enabled | Disabled
attribute=ProcPwrPerf setting=MaxPerf | MinPwr | SysDbpm |
OsDbpm
attribute=ProcTurboMode setting=Enabled | Disabled
attribute=SysProfile setting=PerfPerWattOptimizedOs |
PerfPerWattOptimizedDapc |
PerfOptimized | Custom |
DenseCfgOptimized
attribute=EnergyEfficientTurbo
NOTE: The option is supported only
on 13G and later systems.
setting=Enabled | Disabled
attribute=EnergyPerformanceBias
NOTE: The option is supported only
on 13G and later systems.
setting=MaxPower | BalancedPerformance
| BalancedEfficiency | LowPower
attribute=UncoreFrequency
NOTE: The option is supported only
on 13G and later systems.
setting=DynamicUFS | MaxUFS | MinUFS
attribute=ProcNTurboCoreNum (N= 0-3) ,
where the value of N is 0–3.
NOTE: The option is supported only
on 13G and later systems.
setting=All | 1 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 |
18
attribute=MonitorMwait setting=Enabled | Disabled
attribute=CollaborativeCpuPerfCtrl setting=Enabled | Disabled
System Security attribute=AcPwrRcvry setting=On | Off | Last
70 Omconfig Managing Components Using The Instrumentation Service