CLI Guide
Group name=value pair 1 attribute= name=value pair 2 setting=
attribute=ProcHwPrefetcher setting=Enabled | Disabled
attribute=ProcVirtualization setting=Enabled | Disabled
attribute=QpiBandwidthPriority setting=InputOutput | Compute
attribute=QpiSpeed setting=MaxDataRate | 8GTps | 7GTps |
6GTps
attribute=RtidSetting setting=Enabled | Disabled
attribute=Proc1ControlledTurbo –
Proc4ControlledTurbo
NOTE: The option is supported only
on 13G and later systems.
setting=Disabled | ControlledTurboLimit |
ControlledTurboLimitMinus1 |
ControlledTurboLimitMinus2 |
ControlledTurboLimitMinus3
attribute=ProcConfigTdp
NOTE: The option is supported only
on 13G and later systems.
setting=Nominal | Level1 | Level2
attribute=ProcATS setting=Enabled | Disabled
NOTE: The option is read-only if
ProcVirtualization is set to
Disabled.
attribute=ProcX2Apic
NOTE: The option is supported only
on 13G and later systems.
setting=Enabled | Disabled
NOTE: The option is read-only if
ProcVirtualization is set to
Disabled.
SATA Settings attribute=EmbSata setting=Off | AtaMode | RaidMode |
AhciMode
attribute=eSataPort1 setting=Off | Auto
attribute=eSataPort1Capacity setting=<string>
attribute=eSataPort1DriveType setting=<string>
attribute=eSataPort1Model setting=<string>
attribute=SataPortA - SataPortJ setting=Off | Auto
attribute=SataPortACapacity -
SataPortJCapacity
setting=<string>
attribute=SataPortADriveType -
SataPortJDriveType
setting=<string>
attribute=SataPortAModel -
SataPortJModel
setting=<string>
attribute=SecurityFreezeLock setting=Enabled | Disabled
attribute=WriteCache setting=Enabled | Disabled
Serial Communication attribute=ConTermType setting=Vt100Vt220 | Ansi
attribute=ExtSerialConnector setting=Serial1 | Serial2 | RemoteAccDevice
attribute=FailSafeBaud setting=115200 | 57600 | 19200 | 9600
attribute=RedirAfterBoot setting=Enabled | Disabled
attribute=SerialComm setting=OnNoConRedir | OnConRedirCom1
| OnConRedirCom2 | Off
attribute=SerialPortAddress setting=Serial1Com1Serial2Com2 |
Serial1Com2Serial2Com1 | Com1 | Com2
Slot Disablement attribute=Slotn setting=Enabled | Disabled |
BootDriverDisabled
Omconfig Managing Components Using The Instrumentation Service 69