CLI Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• enabledwithiscsi: Enables the third NIC
during system boot (with iSCSI on if the
system has iSCSI).
attribute=nic4 setting=enabled | enabledwithpxe | disabled
| enabledonly | enablednonepxe |
enabledwithiscsi
• enabled: Enables the fourth NIC during
system boot.
• enabledwithpxe: Enables the fourth
NIC during system boot (with PXE on if
the system has PXE).
• disabled: Disables the fourth NIC during
system boot.
• enabledonly: Enables the fourth NIC
during system boot (with PXE off if the
system has PXE).
• enablednonepxe: Enables the fourth
NIC during system boot (with PXE off if
the system has PXE).
• enabledwithiscsi: Enables the fourth
NIC during system boot (with iSCSI on if
the system has iSCSI).
attribute=numlock setting=on | off
• on: Uses the keypad as number keys.
• off: Uses the keypad as arrow keys.
attribute=NodeInterleave
NOTE: Use NodeInterleave
instead of numa as numa will be
deprecated in future releases.
setting=enabled | disabled
• enabled: Enables Node Interleaving and
disables Non-Uniform Memory Access.
• disabled: Disables Node Interleaving and
enables Non-Uniform Memory Access.
attribute=ppaddress setting=off | lpt1 | lpt2 | lpt3
• off: Disables the parallel port address.
• lpt1: Locates the device on LPT1.
• lpt2: Locates the device on LPT2.
• lpt3: Locates the device on LPT3.
attribute=ppmode setting=at | ps2 | ecp | epp
• at: Sets the parallel port mode to AT.
• ps2: Sets the parallel port mode to
PS/2.
• ecp: Sets the parallel port mode to ECP
(extended capabilities port).
• epp: Sets the parallel port mode to EPP
(enhanced parallel port).
attribute=primaryscsi setting=on | off force=true
CAUTION: If you modify the setting
for primary scsi, romb, romba, or
rombb, the system becomes
inoperable until you reinstall the
operating system.
• on: Enables this device.
• off: Disables this device.
• force=true: Verification of setting
change.
attribute=romb setting=raid | off | scsi force=true
• raid: Instructs the BIOS to detect RAID-
on-motherboard as a RAID device.
• off: Disables RAID-on-motherboard
during system boot.
Omconfig Managing Components Using The Instrumentation Service 63