CLI Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• onpxeboth: Enables PXE on both the
NICs.
• onpxenone: PXE is not enabled on
either of the NICs.
• onpxenic1: Enables PXE on NIC 1.
• onpxenic2: Enables PXE on NIC 2.
attribute=embhypvisor setting=enabled | disabled
• enabled: Enables the embedded
hypervisor.
• disabled: Disables the embedded
hypervisor.
attribute=embvideoctrl setting=enabled | disabled
• enabled: Enables the embedded video
controller as the primary video device.
• disabled: Disables the embedded video
controller as the primary video device.
attribute=esataport setting=off | auto
• off: Sets the embedded SATA port value
to off.
• auto: Sets the embedded SATA port
value to auto.
attribute=extserial setting=com1 | com2 | rad
• com1: Maps the external serial
connector to COM 1.
• com2: Maps the external serial
connector to COM 2.
• rad: Maps the external serial connector
to the remote access device.
attribute=fbr setting=9600 | 19200 | 57600 | 115200
• 9600: Sets the console redirection
failsafe baud rate to 9600 bits per
second.
• 19200: Sets the console redirection
failsafe baud rate to 19200 bits per
second.
• 57600: Sets the console redirection
failsafe baud rate to 57600 bits per
second.
• 115200: Sets the console redirection
failsafe baud rate to 115200 bits per
second.
attribute=htassist setting=enabled | disabled
• enabled: Enables the probe filter chipset
option.
• disabled: Disables the probe filter
chipset option.
NOTE: Certain applications do not
function fully if you enable or
disable this option.
attribute=ide setting=on | off force=true
• on: Enables IDE.
• off: Disables IDE.
• force=true: Verification of setting
change.
attribute=idepridrv setting=off | auto
• off: Disables the device.
• auto: Detects and enables the device
automatically.
Omconfig Managing Components Using The Instrumentation Service 61