CLI Guide

Command
Level 1
Command Level
2
Command Level
3
User
Privilege
Required
Use
chassis or
mainsystem
biossetup A Configures the behavior of specific system components
controlled by the BIOS.
fans P, A
Configures fan probe warning thresholds to the default or a
specific value.
NOTE: You cannot change threshold values on
embedded server management (ESM3) and Dell
PowerEdge x8xx systems.
frontpanel A Configures the Power button, Non-Masking Interrupt (NMI)
button, encryption access, and LCD display of the system.
info P, A Allows you to set an initial value, or to edit the value of the
asset tag or chassis name.
leds P, A Specifies when to flash a chassis fault LED or chassis
identification LED, and allows you to clear the LED for the
system's hard drive.
memorymode A Enables or disables the spare bank, mirroring, raid, and Double
Device Data Correction (DDDC) memory modes, and also
specify which mode to use.
pwrmanagement P, A Allows you to choose between maximum power, economy, and
optimized performance of the system.
pwrmonitoring P, A Configures power consumption information and thresholds.
remoteaccess A Configures remote access information.
temps P, A
Sets warning threshold values to the default or a specific value.
NOTE: You cannot change threshold values on ESM3
and PowerEdge x8xx systems.
volts P, A
Sets warning threshold values to the default or a specific value.
NOTE: You cannot change threshold values on ESM3
and PowerEdge x8xx systems.
storage For more information, see Using The Storage Management
Service.
Help With The Omconfig Command
The following table lists the usage of omconfig commands.
Table 43. Usage Of Omconfig Commands
Command Usage Description
omconfig -? To display the list of the available commands for omconfig.
omconfig <command level 2>
-?
To display the help for about, chassis, preferences, and system’s level 2 commands.
omconfig chassis -? To display the help for omconfig chassis command.
omconfig system -? To display the help for omconfig system command.
omconfig preferences -? To display the available commands for omconfig preferences, such as cdvformat, which is the
custom delimiter format (cdv).
56 Omconfig Managing Components Using The Instrumentation Service