CLI Guide

Output Attributes Description
110.120.130.140: IPv4 address of the second destination.
Destination Number:
Destination 3
destination 3: Displays the third destination.
Example:
201:202:203:204: IPv4 address of the third destination.
Destination Number:
Destination 4
destination 4: Displays the fourth destination.
Example:
210.211.212.213: IPv4 address of the fourth destination.
Destination Number:
Destination 5
destination 5: Displays the fifth destination.
Example:
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
fifth destination.
Destination Number:
Destination 6
destination 6: Displays the sixth destination.
Example:
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
sixth destination.
Destination Number:
Destination 7
destination 7: Displays the seventh destination.
Example:
210.211.212.213: IP address of the seventh destination.
Destination Number:
Destination 8
destination 8: Displays the eighth destination.
Example:
210.211.212.213: IP address of the eighth destination.
Destination Configuration
Settings
attribute=communitystring
communitystring: Displays the text string that acts as a password
and is used to authenticate SNMP messages sent between the BMC
and the destination management station
.
NOTE: On 12G systems with iDRAC7 specific versions, ipaddress can also be a Fully Qualified Domain Name (FQDN).
Omreport System Platformevents Or Omreport
Servermodule Platformevents
Use the omreport system platformevents or omreport servermodule platformevents command to view how the
system responds for each listed platform event.
NOTE:
To maintain consistency across the commands, the output format of this command has changed. Change the
user scripts as applicable.
Omreport System Recovery Or Omreport Servermodule
Recovery
Use the omreport system recovery or omreport servermodule recovery command to see whether there is an action
configured for a hung operating system. You can also view the number of seconds that must elapse before an operating system is
considered hung.
46
omreport Viewing System Status Using The Instrumentation Service