Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Server Administrator Version 9.3.2
41424344454647484950
Omreport System snmptrapdest Or Omreport
Servermodule snmptrapdest
Use the omreport system snmptrapdest or omreport servermodule snmptrapdest command to view the configured
SNMP trap destinations.
When the system is configured with the IP destinations, the following list of IP address is displayed:
Destination1 : <ip address1>
Destination2 : <ip address2>
Destination3 : <ip address3>
Omreport System Operatingsystem Or Omreport
Servermodule Operatingsystem
Use the omreport system operatingsystem or omreport servermodule operatingsystem command to display
information about the operating system.
Omreport System Pedestinations Or Omreport
Servermodule Pedestinations
Use the omreport system pedestinations or omreport servermodule pedestinations command to view
destinations where alerts are sent for platform events. Depending on the number of destinations displayed, configure a separate IP
address for each destination address. Type:
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport servermodule pedestinations command lists each
of the valid parameters.
NOTE:
To maintain consistency across the commands, the output format of this command has changed. Change the
user scripts as applicable.
Destination configuration settings for the Omreport system
pedestinations or Omreport servermodule pedestinations
The actual number of destinations that you can configure on a system using omreport system pedestinations or omreport servermodule
pedestinations may differ.
The following table displays the available settings.
Table 36. Settings For The Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
destination 1: Displays the first destination.
Example:
101.102.103.104: IPv4 address of the first destination.
Destination Number:
Destination 2
destination 2: Displays the second destination.
Example:
omreport Viewing System Status Using The Instrumentation Service 45