CLI Guide

Omreport Chassis Slots Or Omreport Mainsystem Slots

Use the omreport chassis slots or omreport mainsystem slots command to view properties of the system’s slots. Type:

omreport chassis slots index=n

omreport mainsystem slots index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays properties for all of the slots in the

system. If you specify the index, Server Administrator displays properties for a specific slot.

NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the

user scripts as applicable.

For each slot in the system, values display for the following fields given in the following table:

Table 32. Valid Parameters Of Omreport Chassis Slots Or Omreport Mainsystem Slots

Field Description

Index Number of the slot in the system.

Slot ID Silk screen name printed on the system's motherboard next to the slot. Alphanumeric text uniquely identifies each slot in

the system.

Adapter Name and/or type of the card that fits into the slot, for example, a storage array controller, SCSI adapter, iDRAC

Enterprise, or HBA.

Data Bus

Width

Width, in bits, of the information pathway between the components of a system. The range of the data bus width is

from 16 to 64 bits.

Omreport chassis temps or Omreport mainsystem temps

Use the omreport chassis temps or omreport mainsystem temps command to view properties of the system’s

temperature probes. Type:

omreport chassis temps index=n

omreport mainsystem temps index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of status, readings, and

thresholds set for any temperature probes that are present on the system. If you specify the index, Server Administrator displays the

summary for a specific temperature probe.

NOTE:

On servers in the Dell PowerEdge FX2 series chassis, this command is supported only if the Chassis Management

at Server Mode is set to either Monitor or Manage and Monitor in the CMC, and Server Administrator displays the

Chassis Management at Server Mode as Enabled. For more details, see Chassis Management.

Omreport Chassis Volts Or Omreport Mainsystem Volts

Use the omreport chassis volts or omreport mainsystem volts command to view properties of the system’s voltage

probes. Type:

omreport chassis volts index=n

omreport mainsystem volts index=n

omreport Viewing System Status Using The Instrumentation Service