CLI Guide
Field Description
Current Speed Actual processor speed in MHz at system boot time.
State Whether the processor slot is enabled or disabled.
Core Count Number of processors integrated into one chip.
Capabilities and cache properties of a specific processor
To view the cache properties of a processor on a given connector, type:
omreport chassis processors index=n
or
omreport mainsystem processors index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays properties for all processors. If you
specify the index, Server Administrator displays properties for a specific processor.
The following table lists the fields that are defined for the capabilities present on a particular microprocessor:
Table 25. Microprocessors and Fields
Microprocessor Fields
Intel Processor
• 64-bit Support
• Hyperthreading (HT)
• Virtualization Technology (VT)
• Demand-Based Switching (DBS)
• Execute Disable (XD)
• Turbo Mode
AMD Processor
• 64-bit Support
• AMD-V
• AMD PowerNow!
• No Execute (NX)
The following fields are defined for a cache present on a particular microprocessor. If the cache is internal to the processor, the fields do
not appear in the cache report:
• Speed
• Cache Device Supported Type
• Cache Device Current Type
• External Socket Name
The following table displays the fields that are displayed for each cache on a particular processor:
Table 26. Fields And Description
Field Description
Status Reports whether a specific cache on the processor is enabled or disabled.
Level Refers to a primary or secondary cache. Primary-level cache is a memory bank built into the
processor. Secondary-level cache is a staging area that feeds the primary cache. A secondary-
level cache is built into the processor or resides in a memory chipset outside the processor. The
internal processor cache is referred to as a Level 1 (or L1). L2 cache is the external cache in a
system with an Intel Pentium processor, and it is the second level of cache that is accessed.
The names L1 and L2 are not indicative of where the cache is physically located (internal or
external), but describe which cache is accessed first (L1, therefore internal).
Speed Refers to the rate at which the cache can forward data from the main memory to the
processor.
Max Size Maximum amount of memory that the cache can hold in kilobytes.
omreport Viewing System Status Using The Instrumentation Service 33