CLI Guide

If you specify the speedunit MT/s, Server Administrator displays the speed in MT/s.

Table 22. Speedunit detail

Memory Device Information

Health : Ok

Status : Ok

Device Name : A2

Size : 4096 MB

Type : DDR4 Synchronous Registered (Buffered)

Speed : 2133 MT/s

Rank : Single

Failures : None

NOTE: To maintain consistency across the commands, the output format of this command and the subsequent

command levels has changed. Change the user scripts as applicable.

Omreport chassis nics or omreport mainsystem nics

Use the omreport chassis nics or omreport mainsystem nics command to view NIC and Team interface details. On

XenServer, the command displays all the installed NICs, regardless of driver installation.

NOTE:

The order in which devices are detected is not guaranteed to match the physical port ordering of the device.

To view NIC properties, type:

omreport chassis nics index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays properties of all NICs on the system and

the values for the following fields: Index (NIC card number), Interface Name, Vendor, Description, Connection Status,

and Slot.

If you specify the index, Server Administrator displays properties for a specific NIC and the values for the following fields: Physical

Interface, Interface, IPv4 Addresses, IPv6 Addresses, Physical Interface Receive Statistics, Physical

Interface Transmit Statistics, Interface Receive Statistics, and Interface Transmit Statistics.

NOTE:

The Fibre Channel over Ethernet (FCoE) and iSCSI over Ethernet (iSCSI Offload Engine) features of Converged

Network Adapter (CNA) cards are not supported on VMware ESX and VMware ESXi systems.

To view Team interface properties, type:

omreport chassis nics config=team index=n

omreport mainsystem nics config=team index=n

NOTE:

This command is applicable only if Team interface is configured in the system. Team interface is configured

using NIC vendor tools, such as Broadcom.

NOTE: On systems running Linux operating systems with kernel versions earlier than 3.10, Team Interface speed is not

displayed.

omreport Viewing System Status Using The Instrumentation Service 31