CLI Guide

A message that resembles the following is displayed:

Table 16. Output

Intrusion Information

Health : Ok

Index : 0

Status : OK

Probe Name : Intrusion

State : Chassis is closed

Table 17. Output

Intrusion Information

Health : Ok

Index : 1

Status : OK

Probe Name : Drive Bay

State : Bay is open

Omreport Chassis Leds Or Omreport Mainsystem Leds

Use the omreport chassis leds or omreport mainsystem leds command to find out whether clear hard drive fault is

supported and what severity level lights up the LED. Type:

omreport chassis leds index=n

omreport mainsystem leds index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of LED information for chassis

0. If you specify the index, Server Administrator displays a summary for a specific chassis.

The following is an example output:

Table 18. Output

Main System Chassis

Flash chassis identify LED state : Off

Flash chassis identify LED timeout value : 300

Omreport Chassis Memory Or Omreport Mainsystem

Memory

Use the omreport chassis memory or omreport mainsystem memory to view details for each memory module slot in the

system. If the system supports redundant memory, this command also displays the status, state, and type of memory redundancy

implemented on the system. Type:

omreport chassis memory index=n

omreport mainsystem index=n

omreport Viewing System Status Using The Instrumentation Service