CLI Guide

Omreport Chassis Firmware Or Omreport Mainsystem

Firmware

Use the omreport chassis firmware or omreport mainsystem firmware command to view current firmware properties.

When you type:

omreport chassis firmware

omreport mainsystem firmware

Server Administrator displays a summary of the system’s firmware properties.

NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the

user scripts as applicable.

NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is installed, Server

Administrator displays the Unified Server Configurator (USC) version.

Omreport Chassis Frontpanel Or Omreport Mainsystem

Frontpanel

Use the omreport chassis frontpanel or omreport mainsystem frontpanel command to view if the front panel button

control settings, such as the Power button and/or Nonmasking Interrupt (NMI) button (if present on the system), are enabled or

disabled.

If the Power button override is present on the system, check whether the Power button override is enabled or not. If enabled, the

Power button turns the power to the system

On and Off.

If the NMI button is present on the system, check whether the NMI button is enabled or not. Use the NMI button to troubleshoot

software and device errors when using certain operating systems.

The Front Panel LCD Security Access displays if the front panel encryption access information is set to View, Modify, or

Disable.

The Front Panel LCD Information displays information such as service tag, remote indication status, and so on.

Omreport Chassis Fru Or Omreport Mainsystem Fru

Use the omreport chassis fru or omreport mainsystem fru command to view FRU information. When you type:

omreport chassis fru

omreport mainsystem fru

Server Administrator displays a summary of the system’s FRU information. This information is available in the Server Administrator GUI,

SNMP, and Common Information Model and is primarily used to support troubleshooting activities.

Omreport chassis hwperformance or omreport

mainsystem hwperformance

Use the omreport chassis hwperformance or omreport mainsystem hwperformance command to view the status and

cause for the system’s performance degradation. When you type:

omreport chassis hwperformance

omreport Viewing System Status Using The Instrumentation Service