CLI Guide

Command Level 1 CommandLevel 2 Command Level 3 User Privilege
Required
Use
recovery P, A Displays how the system
is configured to respond
to a hung operating
system.
shutdown P, A Displays how to perform
the shutdown action.
summary U, P, A Displays the key facts for
all system components,
including main system
chassis, software, and
storage.
thrmshutdown P, A Displays how to perform
the shutdown action, if
any, when a temperature
warning or failure
condition is detected.
version U, P, A Displays a summary for all
updatable components on
the system.
preferences webserver U, P, A Displays the URL
information of the Server
Administrator Web
server.
messages A Displays the configured
alert message format.
Related Links: omreport: Viewing System Status Using The Instrumentation Service
Help With The omreport Command
Use the omreport -? command to get a list of the available commands for omreport.
Use omreport <command level 2> -? to get help on the level 2 about, chassis, and system commands. The following information
on omreport system -? also applies to get help for the omreport chassis command.
To see a list of valid commands for omreport system, type:
omreport system -? | more
omreport modularenclosure
Use the omreport modularenclosure command to view details of the Blade system. Type:
omreport modularenclosure
NOTE:
This CLI command is available when OpenManage Server Administrator is installed on Dell Blade systems.
Server Administrator displays information related to the modular enclosure and chassis management controller CMC (if available):
NOTE:
The output varies depending on the configuration of the system.
Table 8. Output
Modular Chassis Information
Chassis Information
20 omreport Viewing System Status Using The Instrumentation Service