CLI Guide

Command Level 1 CommandLevel 2 Command Level 3 User Privilege
Required
Use
Interrupt (NMI)
button (if present on the
system), are enabled or
disabled. It also displays
the front panel encryption
access information and
the front panel LCD
information.
fru U, P, A Displays the Field
Replaceable Unit (FRU)
information.
hwperformance U, P, A Displays the status and
cause for the system’s
performance degradation.
info U, P, A Displays a status
summary for main system
chassis components.
intrusion U, P, A Displays the status of the
system’s intrusion
sensor(s).
leds U, P, A Displays the properties
you have set for light-
emitting diodes to flash
under various alert
conditions.
memory U, P, A Displays properties of the
system's memory arrays.
nics U, P, A Displays the NIC and
Team interface
properties.
ports U, P, A Displays the properties
for the system’s parallel
and serial ports, such as
I/O address, IRQ level,
connector type, and
maximum speed.
processors U, P, A Displays properties of the
system’s processors,
including speed,
manufacturer, and
processor family.
pwrmanagement U, P, A Displays power inventory
details such as system
idle power, system
maximum potential
power, and power budget
information.
pwrmonitoring U, P, A Displays properties of
power consumption.
pwrsupplies U, P, A Displays the properties of
power supplies.
remoteaccess U, P, A Displays general
information on remote
access.
18 omreport Viewing System Status Using The Instrumentation Service