CLI Guide

Syntax
omconfig storage pdisk
action=cancelreplacemember controller=id
pdisk=<PDISKID>, where id is the controller ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display
the IDs for the physical disks attached to the controller.
Example to Cancel replace member operation on disk 0:0:1 which is connected
to controller 0
Example
omconfig storage pdisk
action=cancelreplacemember controller=0
pdisk=0:0:1
Omconfig Clear Physical Disk
Table 123. omconfig Clear Physical Disk
Description
Clears data or a configuration from a physical disk.
Syntax
omconfig storage pdisk action=clear
controller=id pdisk=<PDISKID>, where id is the controller
ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display
the IDs for the physical disks attached to the controller.
Example to Clear physical disk 3 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk action=clear
controller=1 pdisk=0:2:3
Omconfig cancel clear physical disk
Table 124. omconfig cancel clear physical disk
Description
Cancels a clear operation in progress on a physical disk.
Syntax
omconfig storage pdisk action=cancelclear
controller=id pdisk=<PDISKID>, where id is the controller
ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display
the IDs for the physical disks attached to the controller.
Example to Cancel the clear of physical disk 3 on connector 0 of controller 1.
On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=cancelclear
controller=1 pdisk=0:2:3
Omconfig storage commands 139