CLI Guide

NOTE: This command is applicable only on Micron
devices.
Syntax
omconfig storage pdisk
action=instantsecureerase controller=id
pdisk=<PDISKID>, where id is the controller ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display
the IDs for the physical disks attached to the controller.
Example to Erase physical disk 3 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=instantsecureerase controller=1
pdisk=0:3
Example for SAS controllers
omconfig storage pdisk
action=instantsecureerase controller=1
pdisk=0:2:3
Omconfig Cryptographic Erase Secured Physical Disk
Table 114. omconfig Cryptographic Erase Secured Physical Disk
Description Erases the given encrypted disk.
NOTE: This command is applicable only on Non-Volatile
Memory Express (NVMe) devices.
Syntax
omconfig storage pdisk
action=cryptographicerase controller=id
pdisk=<PDISKID>, where id is the controller ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display
the IDs for the physical disks attached to the controller.
Example to Erase physical disk 3 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=cryptographicerase controller=1
pdisk=0:3
Example for SAS controllers
omconfig storage pdisk
action=cryptographicerase controller=1
pdisk=0:2:3
Omconfig Initialize Physical Disk
Table 115. omconfig Initialize Physical Disk
Description
Initializes a physical disk.
Omconfig storage commands 135