CLI Guide

Required Command Levels (1, 2, 3) Optional name=value pairs Use
controller=id battery=id, where id is the
controller number. For example: controller=0
Displays the specified battery.
Omreport Global Information
The following table describes the syntax for the omreport Global Information commands:
Table 103. Omreport Global Information Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage globalinfo
Displays whether smart thermal shutdown is
enabled or disabled. For more information,
see Omconfig Global Enable Smart Thermal
Shutdown.
Displays the hot spare protection policy that
you have set. For more information on setting
hot spare protection policy, see the Dell EMC
OpenManage Server Administrator Storage
Management User’s Guide at dell.com/
support/manuals.
Omreport Connector Status
The following table describes the syntax for the omreport Connector commands:
Table 104. omreport Connector Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage connector
Displays all connectors present on all controllers
on the system.
NOTE: This command works only when
the controller ID is specified.
controller=id, where id is the controller
number. For example: controller=0
Displays the connectors on the specified
controller.
controller=id connector=id, where id is
the connector number. For example,
connector=0
Displays the specified connector.
NOTE: When the connectors are
connected to the enclosure in redundant
path mode, the Name of the connector is
displayed as Logical Connector.
Omreport Cachecade Status
The following table describes the syntax for the omreport Cachecade commands
Table 105. omreport Cachecade Commands
Required Command Levels (1, 2,
3)
Optional name=value pairs Use
omreport storage cachecade Displays property information for all cachecades
on all controllers.
controller=id, where id is the controller number.
For example, controller=0.
Displays all cachecades on the specified
controller.
130 Omreport storage commands