CLI Guide

The following message is displayed:
Asset information set successfully.
Adding depreciation information
Depreciation is a set of methods for computing the devaluation of the asset over time. For example, the depreciation of a system that is
expected to have a useful life of 5 years is 20 percent. Use the omconfig system assetinfo info=depreciation or
omconfig servermodule assetinfo info=depreciation command to add details about how the system's depreciation is
computed. The following table shows the valid parameters for the command.
Table 80. Valid Parameters Of omconfig system assetinfo info=depreciation or omconfig servermodule assetinfo
info=depreciation
Command Level 1 Command Level
2
Command Level
3
Name= Value Pair
1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=depreciation duration=<n> Number of years or months
over which a system is
depreciated.
method=<text> Steps and assumptions used
to compute the system's
depreciation.
percent=<n> Portion of 100 that an asset
is devalued or depreciated.
unit=months | years Unit is months or years.
Example command for adding depreciation information
To provide a value for a depreciation parameter, type a command of the form: omconfig system assetinfo
info=depreciation <name=value pair 2> or omconfig servermodule assetinfo info=depreciation
<name=value pair 2>. For example, type:
omconfig system assetinfo info=depreciation method=straightline
or
omconfig servermodule assetinfo info=depreciation method=straightline
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the same
time, as long as all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Commands
For Adding Acquisition Information.
Adding extended warranty information
Use the omconfig system extwarranty or omconfig servermodule extwarranty command to assign values for
extended warranty information. A warranty is a contract between the manufacturer or dealer and the purchaser of a system. The
warranty identifies the components that are covered for repair or replacement for a specified length of time or usage. The extended
warranty comes into force after the original warranty expires. For details on how to edit warranty values, see Adding Warranty
Information.
The following table displays the valid parameters for the command:
114
Omconfig System Or Servermodule Assetinfo Editing Cost Of Ownership Values