CLI Guide

Command Level
1
Command Level
2
Command Level 3 Name= Value
Pair 1
Name= Value Pair 2 Description
that acquired the
system.
expensed=yes | no Whether the system is
charged to a specific
purpose or
department such as
research and
development or sales.
installdate=<mmddyy> Date the system was
put to service.
ponum=<n> Number of the
document that
authorized payment
for the system.
purchasecost=<n> Price the owner paid
for the system.
purchasedate=<mmddyy> Date the owner
purchased the
system.
signauth=<text> Name of the person
who approved the
purchase or the
service call on the
system.
waybill=<n> Receipt from the
carrier for the goods
received.
Example command for adding acquisition information
To provide a value for an acquisition parameter, type a command of the form: omconfig system assetinfo info=acquisition
<name=value pair 2> or omconfig servermodule assetinfo info=acquisition <name=value pair 2>. For
example, type:
omconfig system assetinfo info=acquisition purchasedate=122101
or
omconfig servermodule assetinfo info=acquisition purchasedate=122101
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the same
time, as long as all of the parameters for name=value pair 2 belong to the same name=value pair 1. For example, to type more than one
parameter value for
info=acquisition, use the following example as a syntax guide:
omconfig system assetinfo info=acquisition purchasecost=5000
waybill=123456 installdate=120501 purchasedate=050601 ponum=9999 signauth="John Smith"
expensed=yes costcenter=finance
or
omconfig servermodule assetinfo info=acquisition purchasecost=5000 waybill=123456
installdate=120501 purchasedate=050601 ponum=9999 signauth="John Smith" expensed=yes
costcenter=finance
Omconfig System Or Servermodule Assetinfo Editing Cost Of Ownership Values
113