CLI Guide

Table 77. Valid Parameters Of Thermal Shutdown
name=value pair Description
severity=disabled | warning | failure
disabled: Disable thermal shutdown. An administrator must intervene.
warning: Perform a shutdown when a temperature warning event is detected. A warning
event occurs when any temperature probe inside a chassis reads a temperature (in
degree Celsius) that exceeds the maximum temperature warning threshold value.
failure: Perform a shutdown when a temperature failure event is detected. A failure
event occurs when any temperature probe inside a chassis reads a temperature (in
degree Celsius) that exceeds the maximum temperature failure threshold value.
Example Thermal Shutdown Commands
To trigger a thermal shutdown when a temperature probe detects a failure event, type:
omconfig system thrmshutdown severity=failure
or
omconfig servermodule thrmshutdown severity=failure
To disable thermal shutdown so that an administrator has to initiate an omconfig system shutdown, type:
omconfig system thrmshutdown severity=disabled
or
omconfig servermodule thrmshutdown severity=disabled
Omconfig Managing Components Using The Instrumentation Service
111