Users Guide

Subtab: Fan Probes
Under the Properties tab, you can:
• View the current readings for your system's fan probes and configure minimum and maximum values for fan probe warning threshold.
NOTE: Some fan probe fields differ according to the type of firmware your system has, such as BMC or ESM. Some
threshold values are not editable on BMC-based systems.
•
Select fan control options.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want to be performed in the event that a fan returns a warning or
failure value.
• Set the alert threshold levels for fans.
Firmware
Click the Firmware object to manage your system firmware. Firmware consists of programs or data that have been written to ROM.
Firmware can boot and operate a device. Each controller contains firmware that helps provide the controller's functionality. The Firmware
object action window can have the following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view the system's firmware information.
Hardware performance
Click the Hardware Performance object to view the status and cause for the system’s performance degradation. The Hardware
Performance object action window can have the following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view the details of system’s performance degradation.
The following table lists the possible values for status and cause of a probe:
Table 10. Possible Values For Status And Cause Of A Probe
Status Values Cause Values
Degraded User Configuration
Insufficient Power Capacity
Unknown Reason
Normal [N/A]
Intrusion
Click the Intrusion object to manage your system's chassis intrusion status. Server Administrator monitors chassis intrusion or drive bay
status as a security measure to prevent unauthorized access to your system's critical components. Chassis intrusion indicates that
someone is opening or has opened the cover of the system's chassis. The Intrusion object action window can have the following tabs,
depending on the user's group privileges: Properties and Alert Management
Properties
Subtab: Intrusion
Under the Properties tab, you can view the chassis intrusion status.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
42
Server Administrator services