Reference Guide

Port
Number
Protocols Port Type Maximum
Encryption Level
Direction Usage Configurable
8081 HTTP TCP None Out Link and Launch to FN-IOA, MXL-
IOA
No
* — When a DHCP client connects to a DHCP server, the source port is 68 and the destination port is 67. When the DHCP server
responds to the DHCP client, the source port is 67 and destination port is 68. The CMC acts as a DHCP client.
OpenManage Integration for VMware vCenter
NOTE: When deploying the Server Administrator agent using the Fix non-compliant vSphere hosts link available from
the Compliance window in the Dell Management Center, the OpenManage Integration for VMware vCenter starts the
http Client service and enables port 8080 on and releases after ESXi 5.0 to download OMSA VIB and install it. Once the
OMSA installation is completed, the service automatically stops and the port is closed.
Virtual Appliance
Table 4. Supported Protocols and Ports on Virtual Appliance
Port Number Protocols Port Type Maximum
Encryption
Level
Direction Destination Usage Description
53 DNS TCP None Out OMIVV appliance
to DNS server
DNS client Connectivity
to the DNS
server or
resolving the
host names.
69 TFTP UDP None Out OMIVV appliance
to TFTP server
TFTP Client Used for
firmware
update on 11G
servers with
old firmware.
80/443 HTTP/HTTPS TCP None Out OMIVV appliance
to internet
Dell Online
Data Access
Connectivity
to the online
(Internet)
warranty,
firmware, and
latest RPM
information.
80 HTTP TCP None In ESXi server to
OMIVV appliance
HTTP server Used in
operating
system
deployment
flow for post
installation
scripts to
communicate
with the
OMIVV
appliance.
162 SNMP Agent UDP None In iDRAC/ESXi to
OMIVV appliance
SNMP Agent
(server)
To receive
SNMP traps
from managed
nodes.
443 HTTPS TCP 128-bit In OMIVV UI to
OMIVV appliance
HTTPS server Web services
offered by
OMIVV. These
Ports 9