Connectivity Guide

notReadyCapable(4)
The hard-drive fault LED can indicate not ready.
resetCapable(8)
The hard-drive fault LED can be reset.
Table 232. Hard-Drive Fault LED Control Settings
Variable Name : DellHDFaultLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any fault settings capabilities.
unknown(1)
The hard-drive fault LEDs’ state is unknown.
enabled(2)
The hard-drive fault LEDs’ state is disabled (offline, a binary
0 value) or enabled (online, a binary 1 value).
notReady(4)
The hard-drive fault LEDs’ state is not ready.
reset(8)
The hard-drive fault LEDs have been reset.
resetAndEnable(10)
The hard-drive fault LEDs have been reset and enabled.
Table 233. Chassis Identification Control Capabilities
Variable Name : DellChassisIdentifyControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any chassis identification capabilities.
unknownCapabilities(
1)
The chassis identification control’s capabilities are unknown.
enableCapable(2)
The chassis identification controls can be disabled (offline, a
binary 0 value) or enabled (online, a binary 1 value).
notReadyCapable(4)
The chassis identification control’s capabilities are not
ready.
identifyCapable(8)
The chassis identification control’s LEDs can be made to
identify the chassis.
resetAndEnable(10)
The hard-drive fault LEDs have been reset and enabled.
NOTE: Chassis identification capabilities allow system administrators to set front panel light-emitting diodes (LEDs) to
blink when the chassis has malfunctioning components. When enabled, the blinking lights help administrators locate the
problem chassis.
Table 234. Chassis Identification Control Settings
Variable Name : DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The chassis identification control’s state is unknown..
enabled(2)
The chassis identification control’s state is disabled (offline,
a binary 0 value) or enabled (online, a binary 1 value).
notReady(4)
The chassis identification control’s state is not ready.
identifyChassis(8)
The chassis identification control’s LEDs may be returned to
(normal) 0, or (identify chassis) 1.
58 Server Administrator Group