Connectivity Guide

Syntax Integer
Access Read-only
Tape Drive Table
This table describes available properties for each tape drive on the managed system.
The following object sets up the Tape Drive Table.
Table 1719. Tape Drive Table
Name
tapeDriveTable
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17
Description
A table of listed Tape Drives The number of entries is related to number of Tape Drives
discovered in the system. The maximum number of entries is implementation-dependent.
NOTE: The properties in this table may not be applicable to all entries.
Syntax SEQUENCE OF TapeDriveEntry
Access Not accessible
Table 1720. Tape Drive Entry
Name
tapeDriveEntry
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1
Description An entry in the Tape Library table. A row in this table cannot be created or deleted by SNMP
operations on columns of the table.
Syntax TapeDriveEntry
Access Not accessible
Table 1721. Tape Drive Number
Name
tapeDriveNumber
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.1
Description Instance number of this tape drive entry.
Syntax INTEGER
Access Read-only
Table 1722. Tape Drive Name
Name
tapeDriveName
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.2
Description The name of the tape drive as represented in Storage Management.
Syntax DisplayString
Access Read-only
Table 1723. Tape Drive Vendor
Name
tapeDriveVendor
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.3
Description The tape drive's manufacturer's name.
Syntax DisplayString
Access Read-only
Storage Management Group 359