Dell EMC OpenManage Version Port Information Guide Version 9.3.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Introduction................................................................................................................................. 4 Accessing documents from the Dell EMC support site.................................................................................................... 4 Other Documents You May Need....................................................................................................................................... 4 Contacting Dell EMC...................
1 Introduction The Dell EMC OpenManage Port Information document helps system administrators and technicians to identify the ports usage in Dell EMC OpenManage systems management software, standard operating system services, and other agent applications. NOTE: This document includes sections or data that is not applicable to the PowerEdge MX740x and PowerEdge MX840c.
• • • • • • • • • • • • • • • • • The Dell EMC OpenManage Management Station Software Installation Guide contains instructions to help you install Dell EMC OpenManage management station software that includes Baseboard Management Utility, DRAC Tools, and Active Directory Snap-In. The Dell EMC OpenManage Server Administrator SNMP Reference Guide documents the Simple Network Management Protocol (SNMP) management information base (MIB).
2 Ports The following tables list the ports used by the OpenManage systems management software, standard operating system services and other agent applications. NOTE: Ports with the correct configuration are necessary to allow OpenManage systems management software to connect to a remote device through firewalls. NOTE: The systems management software version mentioned indicates the minimum version of the product required to use that port. NOTE: CIM ports are dynamic.
OpenManage Essentials Management Stations Table 1. Supported Protocols and Ports on Management Stations Port Protocol Number Port Type Maximum Encryption Level Direction Usage 25 SMTP TCP None In/Out Optional email alert action 162 SNMP UDP None In Event reception through SNMP 1433 Proprietary TCP None In/Out Optional remote SQL server access 2607 HTTPS TCP 128-bit SSL In/Out Web GUI 1278 HTTP TCP None In/Out To launch OME console over HTTP Managed Nodes Table 2.
Port Number Protocol Port Type Maximum Encryption Level Direction Usage 1433 Proprietary TCP None In/Out Optional remote SQL server access 3389 RDP TCP 128 - bit SSL In/Out Contextual application launch— Remote desktop to Windows terminal services 6389 Proprietary TCP None In/out EMC storage discovery and inventory.
* — When a DHCP client connects to a DHCP server, the source port is 68 and the destination port is 67. When the DHCP server responds to the DHCP client, the source port is 67 and destination port is 68. The CMC acts as a DHCP client.
Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 111 NFS UDP/TCP 128–bit In SUN Remote Procedure Call (Portmap) No 162, 11620 SNMP UDP None Out Hardware Events No 443 WSMAN TCP 128-bit In iDRAC/OMSA communication No 443 HTTPS TCP 128–bit IN HTTPS server No 631 IPP UDP/TCP None Out Internet Printing Protocol (IPP) No 4433 HTTPS TCP 128-bit Out Auto Discovery No 2049 NFS UDP None All Public Share No 4001-4004 NFS UDP
OpenManage Storage Management Table 7. Supported Protocols and Ports Port Number Protocol Port Type Direction Usage Configurable 5554 TCP TCP In/Out Personal agent to transfer data between LSI IDE solution server and client No Dell Command Monitor OpenManage Client Instrumentation Table 8. Supported Protocols and Ports Port Number Protocols 20 Port Type Version Maximum Encryption Level Direction Usage Configurable HTTP and FTP TCP 7.
Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 623 RMCP UDP 1.x None In/Out Basic BMC commands: server status, power up/ down, and so on. No 623 RMCP UDP 1.x None In/Out Basic BMC No commands and console redirection Dell Management Console Table 10. Supported Protocols and Ports Port Number Protocol Port Type Version Maximum Encryption Level Directio n Usage 22 SSH TCP 1.x – 2.0.
Port Number Protocol Port Type 401-402 Version Maximum Encryption Level TCP/UD P 443 Proprieta TCP ry/ Symante c Agent, WSMan 445 UDP 1.x – 2.0.
Port Number Protocol Port Type 1024– 65535 DCOM Version Maximum Encryption Level TCP/UD Unknow None P n Directio n Usage Configurable In/Out WMI query management (random port) OS msdn.microsoft .com/enus/ library/ ms809327.aspx OpenManage Power Center Management Station Table 11.
NOTE: All other ports are as per SCCM. For more information, go to https://technet.microsoft.com/en-us/library/ hh427328.aspx Table 14.
Dell Connections License Manager DCLM Table 17. Management Station Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 8543 HTTP TCP None In/Out DCLM Web Service UI No 8544 HTTP TCP None In/Out DCLM Web Server No Dell EMC OpenManage Integration for Microsoft System Center for Operations Manager Table 18.
Table 21.
Table 25. Managed Node Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 443 WSMan TCP 128-bit In/Out ESXi Communication No 161 SNMP UDP None In/Out SNMP Query Management No 162 SNMP UDP None Out Hardware SNMP Events No 2463 SymbolSDK TCP None In PowerVault MD Array Communication No 1311 HTTP/HTTPS TCP None In/Out OMSA Web Console No Dell EMC OpenManage Plug-in for Nagios Table 26.
Port Number Protocols Configurable 23 Telnet Yes 80 HTTP Yes 161 SNMP Agent No 443 HTTPS Yes 623 RMCP/ RMCP+ Yes 5900 Virtual Console Keyboard and mouse redirection, Virtual Media, Virtual Folders, Remote File Share Yes 5901 Virtual Network Computing (VNC) Yes Table 30.
Port Number Protocols Configurable 3269 LDAPS for global catalog (GC) No iDRAC for Blade Servers Table 32. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurab le 22 Secure Shell (SSH) TCP 1.30 128-bit SSL In/Out Secure CLI management Yes 23 Telnet TCP 1.0 None In/Out Optional Telnet-based Yes CLI management 25 SMTP TCP 1.0 None In/Out Optional e-mail alert messages No 53 DNS UDP 1.
iDRAC6 Enterprise for Blade Servers Table 33. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 22 SSH TCP 1.30 128-bit SSL In/Out Secure CLI management Yes 23 Telnet TCP 1.0 None In/Out Optional Telnet-based CLI management Yes 25 SMTP TCP 1.0 None In/Out Optional e-mail No alert messages 53 DNS UDP 1.
Dell Remote Access Configuration Tool DRACT Table 34. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 443 HTTPS TCP 1.0 128-bit SSL In/Out Web No management GUI and remote racadm CLI utility Digital KVM Table 35. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 2068 Proprietary TCP 1.
Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 80 HTTP TCP 1.0 None In/Out Web GUI redirected to HTTPS Yes 161 SNMP UDP 1.0 None In/Out SNMP query management No 162 SNMP UDP 1.0 None Out SNMP trap event No 443 HTTPS TCP 1.0 128-bit SSL In/Out Web No management GUI and remote racadm CLI utility 623 RMCP/RMCP + UDP 1.0 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.
Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage 53 DNS UDP 1.20 None In/Out Dynamic No Domain name server (DNS) registration of the host name assigned within DRAC 68 DHCP UDP 1.0 None In/Out DHCP assigned No IP address 69 TFTP UDP 1.0 None In/Out Firmware No update through Trivial FTP 80 HTTP TCP 1.0 None In/Out Web GUI redirected to HTTPS Yes 161 SNMP Agent UDP 1.0 None In/Out SNMP query management No 162 SNMP UDP 1.