Install Guide
• Install the net-snmp package that is provided with the operating system if you use SNMP to manage the server. If you want to use
supporting agents for the ucd-snmp or net-snmp agent, you must install the operating system support for the SNMP standard before
you install Server Administrator. For more information about installing SNMP, see the installation instructions for the operating system
you are running on the system.
NOTE: When installing RPM packages, to avoid warnings concerning the RPM–GPG key, import the key with a command similar
to rpm --import <OM DVD mountpoint>/SYSMGMT/srvadmin/linux/RPM-GPG-KEY
NOTE: Before installing Server Administrator on SLES15, you must install insserv-compat package else the installation fails.
• In case of Red Hat Enterprise Linux or later and SLES, install the wsman and sblim packages from the operating system DVD. See, To
install the wsman and sblim packages
• Install all the prerequisite RPMs required for successful installation.
If the system had factory-installed, Red Hat Enterprise Linux, or SUSE Linux Enterprise Server, see the Dependent RPMs for Remote
Enablement section for information on any RPMs that you need to manually install prior to installing managed system software.
Typically, you may not need to manually install any RPMs.
Installation des progiciels wsman et sblim
1 Sous Sélection du progiciel, cliquez sur Serveur de base.
2 Sélectionnez Personnaliser maintenant, puis cliquez sur Suivant.
3 Sélectionnez le groupe System Management (Gestion du système).
4 Dans cette sous-catégorie, sélectionnez l'option Web-based Enterprise Management > Progiciels en option. Les progiciels
sélectionnés par défaut sont les suivants : openwsman-client, sblim-sfcb, sblim-wbemcli et wsmancli.
Désélectionnez le progiciel sblim-wbemcli dans la liste ci-dessus.
5 Sélectionnez openwsman-server et cliquez sur Suivant.
6 Après l'installation du système d'exploitation, installez le progiciel libcmpiCppImpl0 à partir du DVD du système d'exploitation ou avec
l'utilitaire Yum.
Installation du logiciel Managed System à l'aide du support
fourni
Le programme d'installation utilise des RPM pour installer chaque composant. Le logiciel (DVD) est divisé en sous-répertoires an de
faciliter l'installation personnalisée.
Pour vérier le logiciel avant de l'installer, procédez comme suit :
1 Chargez le logiciel Dell EMC OpenManage Systems Management Tools and Documentation sur le lecteur de DVD.
2 Montez le DVD, le cas échéant.
3 Une fois le DVD monté, accédez à : <OM DVD mount point>/SYSMGMT/srvadmin/linux/
Le script d'installation et le dossier RPM sont disponibles dans le répertoire Linux.
Express Install
Use the provided shell script to perform the express installation on supported Linux operating systems.
NOTE
: On the Red Hat Enterprise Linux 6.x operating system, DVDs are auto‑mounted with the -noexec mount option. This
option does not allow you to run any executable from the DVD. Manually mount the DVD and then run executables.
1
Log in as root to the system running the supported operating system where you want to install the managed system components.
2 Mount the Dell EMC OpenManage Systems Management Tools and Documentation software into the DVD drive.
3 Mount the DVD, if required.
24
Installing Managed System Software On Supported Linux And VMware ESXi