Install Guide
The DVD provides RPMs that enable repository-based installation using clients such as Yum and Zypper. There are RPMs that install the
entire set or you can select individual RPMs to install specic components. The RPMs are available at:
SYSMGMT/srvadmin/linux/RPMS/supportRPMS/metaRPMS
The following list of RPMs enables the installation of a particular RPM set.
Table 6. Meta RPMs
Meta RPMs Details
srvadmin-all Installs all the components.
srvadmin-base Installs the Server Instrumentation component. This component
has to be installed before installing any of the other specic
components.
srvadmin-idrac Installs the iDRAC component.
srvadmin-standardAgent Installs the Remote Enablement component.
srvadmin-storageservices Installs the storage services component.
srvadmin-webserver Installs the web server component.
srvadmin-server-snmp Installs the server Simple Network Management Protocol (SNMP)
component.
srvadmin-server-cli Installs the server Command Line Interface (CLI) component.
srvadmin-storageservices-snmp Installs the storage SNMP component.
srvadmin-storageservices-cli Installs the storage CLI component.
Related Links:
Linux Installer Packages
Custom RPMs Based Installation
The following is an example of custom RPMs-based installation of Server Administrator, including the installation of the Remote
Enablement feature and the Storage Management Service components.
NOTE
: On the Red Hat Enterprise Linux operating system, DVDs are automounted with the -noexec mount option. This option
does not allow you to run any executable from the DVD. You have to manually mount the DVD and then run executables.
1 Log in as root to the system running the supported operating system where you want to install the managed system components.
2 Insert the Dell EMC OpenManage Systems Management Tools and Documentation software into the DVD drive.
3 Navigate to the operating system specic directory corresponding to the system.
4 Type the following command:
rpm –ivh Server-Instrumentation/<arch>/*.rpm
add-StorageManagement/<arch>/*.rpm
RemoteEnablement/<arch>/*.rpm
Server Administrator services do not start automatically.
NOTE
: Ensure that you install Server Instrumentation or Remote Enablement before installing Remote Access Controller
or Storage Management.
NOTE: If you choose to install the Remote Enablement feature, ensure that you install the dependent RPMs before
installing this feature.
Installing Managed System Software On Supported Linux And VMware ESXi 25