Dell EMC Server Administrator Storage Management 9.2.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview.......................................................................................................................................................12 What Is New In This Release...........................................................................................................................................12 Before Installing Storage Management..........................................................................................................................
Storage Properties And Current Activity...................................................................................................................... 29 Alerts Or Events...............................................................................................................................................................29 Monitoring Disk Reliability On RAID Controllers...........................................................................................................
Firmware Or Driver Properties..................................................................................................................................47 Controller Health.............................................................................................................................................................. 48 Controller Components.............................................................................................................................................
8 Support For PERC 9 and PERC 10 Hardware Controllers.............................................................................83 Support For RAID Level 10 Virtual Disk Creation On PERC 9 and PERC 10 Hardware Controllers...................... 83 RAID Level 10 Virtual Disk Creation With Uneven Span........................................................................................84 Support For Advanced Format 4KB Sector Hard-Disk Drives.................................................................
13 RAID Controller Batteries..........................................................................................................................105 Battery Properties And Tasks....................................................................................................................................... 105 Battery Tasks..................................................................................................................................................................
Virtual Disk Properties..............................................................................................................................................127 Virtual Disk Tasks......................................................................................................................................................129 Virtual Disk — Available Tasks......................................................................................................................................
To Locate Split Mirror In Storage Management ...................................................................................................144 Unmirror...........................................................................................................................................................................144 To Unmirror...............................................................................................................................................................
Physical Disk Is Offline Or Displays An Error Status.............................................................................................156 Receive A Bad Block Alert With Replacement, Sense, Or Medium Error......................................................... 156 Alerts 2146 Through 2150 Received During A Rebuild Or While A Virtual Disk Is Degraded...........................157 Alerts 2146 Through 2150 Received While Performing IO, Consistency Check, Format, Or Other Operation..................
Enclosure Support On The PERC Software RAID Controllers........................................................................... 193 21 Determining The Health Status For Storage Components......................................................................... 194 Health Status Rollup - Battery Is Charging Or Dead..................................................................................................194 Health Status Rollup - Physical Disks In A Virtual Disk Are Failed Or Removed...............
1 Overview Server Administrator Storage Management provides enhanced features for configuring the locally attached RAID and non-RAID disk storage on a system. Storage Management enables you to perform controller and enclosure functions for all supported RAID and non-RAID controllers and enclosures from a single graphical user interface (GUI) or command-line interface (CLI). The GUI is wizard-driven and includes features for novice and advanced users. The CLI is fully featured and scriptable.
Supported Controllers NOTE: The firmware and drivers listed in the Server Administrator Release Notes refer to the minimum supported version for these controllers. Later versions of the firmware and drivers are also supported. For the most recent driver and firmware requirements, contact your service provider. This release of Storage Management supports the following controllers. Supported RAID Controllers Storage Management supports the following RAID controllers.
NOTE: When a backplane without an expander (passive backplane) is connected to an HBA 330 controller, the enumeration of the physical disks is split between Connector 0 and Connector 1. For example, if the passive backplane is populated with a maximum of eight physical disks, the first four physical disks are listed under Connector 0 and the remaining four physical disks are listed under Connector 1. You will be able to view all the eight physical disks only if both bays are connected.
2 Getting Started Server Administrator Storage Management is designed for system administrators who implement hardware RAID solutions and understand corporate and small business storage environments. Storage Management enables you to configure the storage components attached to your system. These components include RAID and non-RAID controllers and the channels, ports, enclosures, and disks attached to them.
On A System Running Linux And Any Remote System To start a Server Administrator session on a Linux or any remote system, click the Server Administrator icon on your desktop and log in using an account with Administrator privileges. Or, open a web browser and type one of the following in the address field and press : https://:1311 where is the assigned name for the managed system and 1311 is the default port.
Information Or Configuration On the Properties page, click Information/Configuration to view the property information for a storage object. The Information/ Configuration subtabs also have options for executing storage tasks or launching wizards. Using The Storage Management Command-Line Interface Storage Management has a fully featured command-line interface (CLI). For more information on CLI, see the Server Administrator Command Line Interface User’s Guide.
3 Understanding RAID concepts Storage Management uses the Redundant Array of Independent Disks (RAID) technology to provide Storage Management capability. Understanding Storage Management requires an understanding of RAID concepts, as well as some familiarity with how the RAID controllers and operating system view disk space on your system.
• Striping — Disk striping writes data across all physical disks in a virtual disk. Each stripe consists of consecutive virtual disk data addresses that are mapped in fixed-size units to each physical disk in the virtual disk using a sequential pattern. For example, if the virtual disk includes five physical disks, the stripe writes data to physical disks one through five without repeating any of the physical disks. The amount of space consumed by a stripe is the same on each physical disk.
The following topics provide specific information on how each RAID level or concatenation store data as well as their performance and protection characteristics: • Concatenation • RAID Level 0 (Striping) • RAID Level 1 (Mirroring) • RAID Level 5 (Striping With Distributed Parity) • RAID Level 6 (Striping With Additional Distributed Parity) • RAID Level 50 (Striping Over RAID 5 Sets) • RAID Level 60 (Striping Over RAID 6 Sets) • RAID Level 10 (Striping Over Mirror Sets) • Comparing RAID Leve
• Data fills up the first disk before it is written to the second disk. • No redundant data is stored. When a disk fails, the large virtual disk fails. • No performance gain. • No redundancy. RAID level 0 - striping RAID 0 uses data striping, which is writing data in equal-sized segments across the physical disks. RAID 0 does not provide data redundancy. RAID 0 characteristics: • Groups n disks as one large virtual disk with a capacity of (smallest disk size) *n disks.
RAID 1 characteristics: • • • • • • Groups n + n disks as one virtual disk with the capacity of n disks. The controllers currently supported by Storage Management allow the selection of two disks when creating a RAID 1. Because these disks are mirrored, the total storage capacity is equal to one disk. Data is replicated on both the disks. When a disk fails, the virtual disk still works. The data is read from the mirror of the failed disk. Better read performance, but slightly slower write performance.
RAID 5 characteristics: • • • • • Groups n disks as one large virtual disk with a capacity of (n-1) disks. Redundant information (parity) is alternately stored on all disks. When a disk fails, the virtual disk still works, but it is operating in a degraded state. The data is reconstructed from the surviving disks. Better read performance, but slower write performance. Redundancy for protection of data.
RAID 50 characteristics: • Groups n*s disks as one large virtual disk with a capacity of s*(n-1) disks, where s is the number of spans and n is the number of disks within each span. • Redundant information (parity) is alternately stored on all disks of each RAID 5 span. • Better read performance, but slower write performance. • Requires as much parity information as standard RAID 5. • Data is striped across all spans. RAID 50 is more expensive in terms of disk space.
RAID 60 characteristics: • Groups n*s disks as one large virtual disk with a capacity of s*(n-2) disks, where s is the number of spans and n is the number of disks within each span. • Redundant information (parity) is alternately stored on all disks of each RAID 6 span. • Better read performance, but slower write performance. • Increased redundancy provides greater data protection than a RAID 50. • Requires proportionally as much parity information as RAID 6.
RAID 10 characteristics: • Groups n disks as one large virtual disk with a capacity of (n/2) disks, where n is an even integer. • Mirror images of the data are striped across sets of physical disks. This level provides redundancy through mirroring. • When a disk fails, the virtual disk still works. The data is read from the surviving mirrored disk. • Improved read performance and write performance. • Redundancy for protection of data.
RAID Level Data Availability Read Performance Write Performance Rebuild Performance Minimum Disks Required Suggested Uses RAID 1 Excellent Very Good Good Good 2N (N = 1) Small databases, database logs, and critical information. RAID 5 Good Sequential reads: good. Transactional reads: Very good Fair, unless using writeback cache Fair N + 1 (N = at least Databases and two disks) other read intensive transactional uses.
4 Quick Access To Storage Status And Tasks This section describes various methods to determine the status or health of the storage components on your system and how to quickly launch the available controller tasks.
Table 2. Component Severity Severity Component Status Normal/OK — The component is working as expected. Warning/Non-critical — A probe or other monitoring device has detected a reading for the component that is above or below the acceptable level. The component may still be functioning, but it could fail. The component may also be functioning in an impaired state. Data loss is possible. Critical/Failure/Error/Fatal — The component has either failed or failure is imminent.
NOTE: You may not receive SMART alerts when the I/O of a controller is paused. Using Alarms To Detect Failures Certain storage components have alarms which when enabled, alert you when the component fails. Time Delay In Displaying Configuration Changes When you change the storage configuration, Storage Management quickly generates SNMP traps in response to the configuration changes. The Storage Management, Management Information Base (MIB) is also updated to reflect storage configuration changes.
5 PCI Express Solid-State Device Support This section provides an overview of the Storage Management device management support for Peripheral Component Interconnect Express (PCIe) Solid-State Drive (SSD) and its associated devices like the backplane and extender card. In Storage Management, PCIe SSD appears under Storage in the tree view. Storage Management reports the PCIe SSD devices and its various properties.
• PCIe Solid-State Device Table 3. PCIe SSD Subsystem Properties Properties Description ID Displays the subsystem ID assigned to the PCIe SSD subsystem by Storage Management. Storage Management numbers the controllers and PCIe SSD subsystems attached to the system starting with zero. This number is the same as the PCIe SSD subsystem ID number reported by the omreportcommand. For information on Command Line Interface, see the Server Administrator Command Line Interface User's Guide.
The following table lists the physical device properties for PCIe SSD. Table 4. Physical Device Properties Properties Description Name Displays the name of the PCIe SSD. The name comprises the bay ID and the slot in which the PCIe SSD is installed. State Displays the health state of the PCIe SSD. Bus Protocol Displays the technology that the PCIe SSD is using. Device Protocol Displays the device protocol of the physical device, such as NonVolatile Memory Express (NVMe).
Properties Description Read Only — The drive is in read-only mode. Users must save open files, if any, to another device and replace or remove the device. If this scenario occurs within three years of the device installation, this failure is covered under warranty. The drive is in read-only mode if the value for percent lifetime used is less than 100 percent and that for write protect progress is equal to 90 percent.
Properties Description NOTE: This field is not applicable for NVMe Intel P4800x devices. Physical Device Tasks The physical device tasks for PCIe SSD are as follows: • Blinking And Unblinking • Preparing To Remove A PCIe SSD • Exporting The Log • Performing A Cryptographic Erase on An NVMe PCIe SSD To perform a physical device task: 1 In the Server Administrator window, under the System tree, expand the Storage tree object to display the storage component objects.
Exporting The Log The export log contains debug information for the PCIe SSD and can be useful when troubleshooting. You can export the reliability log from the Physical Device Available Tasks drop-down list. Performing A Cryptographic Erase On An NVMe PCIe SSD NOTE: The virtual disk with RAID 10 configuration cannot be created for the selected number of physical disks. Please refer OpenManage CLI guide for details. Does my controller support this feature? See Supported Features.
4 Select a task from the Available Tasks drop-down menu. 5 Click Execute. To Locate Cryptographic Erase In Storage Management For A PCIe SSD In Slot Card 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Expand a controller object. 3 Select the PCIe SSD in Slot object. 4 Select Cryptographic Erase from the Tasks drop-down menu of the physical device you want to clear. 5 Click Execute.
6 Storage Information And Global Tasks Use the Storage information and Global Tasks window to view high-level information about the storage components or devices on your system. These windows also allow you to launch global tasks that affect all controllers attached to the system. Topics: • Storage Properties • Global Tasks • Storage Controller Properties Storage Properties The Storage tree-view object has the following properties. Table 5.
To set the Remaining Rated Write Endurance Threshold: 1 In the Server Administrator window, under the System tree, select the Storage tree object. The storage Properties window is displayed. 2 Click the Information/Configuration subtab to display more information. 3 Under Global Tasks, select Set Remaining Rated Write Endurance Threshold from the drop-down menu. NOTE: You can also click the Set Remaining Rated Writer Endurance Threshold link available on the Storage Dashboard to access this operation.
NOTE: If the warning threshold value for an available spare is set, a warning alert message will be generated when it reaches the value or less than that. If the critical threshold for an available spare is set, a critical alert message will be generated when it reaches the value or less than that. NOTE: You can select this option from the Information/Configuration tab > Global Tasks also. The Set Available Spare Threshold window is displayed.
Property Definition • • • Ready — The controller is functioning normally. Degraded — The controller has suffered a failure of a component and is operating in a degraded state. Failed — The controller has suffered a failure of one or more components and is no longer functioning. Firmware Version Displays the version of the firmware available on the controller. Minimum Required Firmware Version Displays the minimum firmware version that is required by Storage Management.
7 Controllers This chapter provides information about the supported controllers and controller features in Storage Management.
SAS RAID Controllers The following RAID controllers use Serial Attached SCSI (SAS) technology.
Controller — Supported Stripe Sizes When creating a virtual disk, you must specify the stripe size for the virtual disk. Different controllers have different limitations on the stripe sizes they can support. For information on the supported stripe sizes for a controller, see the virtual disk specifications section for the controller in Supported Features.
• • NOTE: Write-through is the default write policy setting when cluster mode is enabled. Write Cache Enabled Protected — The controller writes data to the write cache before writing data to the physical disk. Because it takes less time to write data to the write cache than it does to a disk, enabling write cache can improve system performance. After data is written to the write cache, the system is free to continue with other operations.
• Default — The disk uses the default write cache mode. • Enabled — Disk Cache Policy is enabled. • Disabled — Disk Cache Policy is disabled. • Inconsistent — The disk cache policy is not uniform across all the physical disks in the virtual disk. For example, if a virtual disk contains three physical disks; the disk cache policy of the first physical disk is Enabled, the second physical disk is Disabled, and the third physical disk is Default.
NOTE: Storage Management only enumerates and provides the PCI slot information for Broadcom SAS 9207-8e and SAS 9300-8e controllers. As Storage Management does not monitor these non-RAID controllers, devices connected to these controllers are not enumerated, alerts are not logged, and SNMP traps are not sent for these controllers.
Property Definition Minimum Required Storport Driver Version Displays the minimum storport driver version required by Storage Management. This property is displayed if the operating system storport driver does not meet the minimum requirement. This option is applicable only on systems running Microsoft Windows operating system. NOTE: To download the latest storport driver, see the Microsoft Knowledge Base article KB943545 at support.microsoft.com.
Property Definition Name Displays the name of the controller. NOTE: For PowerEdge FD332 storage sled, the name is displayed as: • • Single controller — PERC FD33xS (Integrated RAID Controller in Front Chassis Slot , where X displays the controller number and Y displays the front chassis slot number. Dual controller — PERC FD33xD (Integrated RAID Controller in Front Chassis Slot , where X displays the controller number and Y displays the front chassis slot number.
Property Definition Rebuild Rate Rebuild rate is the percentage of resources available on a system dedicated to rebuild a failed disk when necessary. For more information on rebuild rate, see Setting The Rebuild Rate. NOTE: The value for the Revertible Hot Spare operation is the same as the value set for the Rebuild Rate property.
Property Definition Patrol Read Mode Displays the Patrol Read Mode setting for the controller. Possible values are: • • • Auto — Patrol read runs continuously on the system. When one iteration of the patrol read is complete, the next patrol read is scheduled to start within an interval specified by the controller. You do not have the option of manually starting or stopping the Patrol Read in this mode. Manual — Allows you to manually start or stop the patrol read process.
Property Definition NOTE: This is supported only on two controllers H740P and H745PMX. Front Chassis Slot Displays the front chassis slot number. This property is applicable only for PowerEdge FD332 storage sled. For more information on PowerEdge FD332, see the Dell PowerEdge FD332 Owner's Manual at dell.com/ poweredgemanuals. Controller Tasks To execute a controller task: 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects.
• • Changing The Controller Mode Auto Configure RAID0 Operation Creating A Virtual Disk Does my controller support this feature? See Supported Features. To launch the Create Virtual Disk Express Wizard, select the Create Virtual Disk task. Enabling The Controller Alarm Does my controller support this feature? See Supported Features. To enable the alarm on the controller, select the Enable Alarm task. When enabled, the alarm sounds in the event of a device failure.
On the PERC controllers, the controller firmware also uses the rebuild rate setting to control the system resource allocation for the following tasks: • Performing A Check Consistency • Background Initialization. See Cancelling Background Initialization • Full Initialization. A BIOS setting determines whether a full or fast initialization occurs. See Format, Initialize, Slow And Fast Initialize • Reconfigure.
To Locate Reset Configuration In Storage Management 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Select a controller object. 3 Click Information/Configuration. 4 Select Reset Configuration from the Available Tasks drop-down menu. 5 Click Execute. You can also locate this task from the Change Controller Properties drop-down menu. Exporting The Controller Log File Does my controller support this feature? See Supported Features.
NOTE: This task is not supported on PERC hardware controllers running in HBA mode. NOTE: Foreign Configuration Operations task is available only on PERC 6 and SAS controllers with firmware versions 6.1 and later. A foreign configuration is data residing on physical disks that have been moved from one controller to another. Virtual disks residing on physical disks that have been moved are considered to be a foreign configuration.
Property Definition The foreign configuration may be in degraded or failed state due to any of the following reasons: • • • • • • • Missing physical disk — One of the physical disk(s) in the potential virtual disk is missing or not available. Missing span — One or more spans of a hybrid virtual disk is missing. Stale physical disks — One or more physical disks in the configuration may contain out-of-date data relating to other disks of that virtual disk.
You can import a foreign configuration only if it contains a virtual disk that is either in a Ready or Degraded state. In other words, all of the virtual disk data must be present, but if the virtual disk is using a redundant RAID level, the additional redundant data is not required. For example, if the foreign configuration contains only one side of a mirror in a RAID 1 virtual disk, then the virtual disk is in a Degraded state and can be imported.
Clearing Foreign Configuration Does my controller support this feature? See Supported Features. After moving a physical disk from one controller to another, you may find that the physical disk contains all or some portion of a virtual disk (foreign configuration). You can identify whether a previously used physical disk contains a foreign configuration (virtual disk) by checking the physical disk state.
Property Definition For more information, see Storage Component Severity. Name Displays the name of the physical disk. The name is comprised of the connector number followed by the disk number. State Displays the current state of the physical disk. After Import State Displays the after-import state of the physical disk. The physical disk can be imported in any of the following states: • • • • • Online — The physical disk is part of the imported virtual disk and functions normally.
Property Definition • Used RAID Disk Space Unknown — Storage Management is unable to determine the media type of the physical disk. Displays the amount of the physical disk space that is used by the virtual disks on the controller. This property is not applicable for physical disks attached to non-RAID controllers. In certain circumstances, the Used RAID Disk Space displays a value of zero (0) even though a portion of the physical disk is actually being used. This occurs when the used space is 0.
Setting Background Initialization Rate Does my controller support this feature? See Supported Features. The Set Background Initialization Rate task changes the amount of system resources dedicated to the background initialization task. The background initialization rate, configurable between 0% and 100%, represents the percentage of the system resources dedicated for running the background initialization task.
To Locate Set Check Consistency Rate In Storage Management 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Select a controller object. 3 Click Information/Configuration on the controller Properties page. 4 Select Set Check Consistency Rate from the Available Tasks drop-down menu. 5 Click Execute. You can also locate this task from the Change Controller Properties drop-down menu.
The Set Patrol Read task runs in the background and corrects, when possible. When the Set Patrol Read mode is set to Auto, patrol read is initiated when the controller is idle for a period of time and when no other background tasks are active. In this scenario, the patrol read enhances the system performance as disk errors can be identified and corrected when there is not input/output activity on the disk.
There are certain conditions under which the Patrol Read task cannot be run. To start or stop the Patrol Read Task: Click Start Patrol Read or Stop Patrol Read. NOTE: On PERC 9 family and later of hardware controllers, the Stop Patrol Read task displays: Patrol Read Aborted or Manually Stopped. On controllers prior to PERC 9, the Stop Patrol Read task displays: Patrol Read is Completed. To exit without starting or stopping the Patrol Read, click Go Back to Previous Page.
To Locate Change Controller Properties In Storage Management - Method 2 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Select a controller object. 3 Click Information/Configuration on the controller Properties page. 4 Select Change Controller Properties ... from the Controller Tasks drop-down menu. 5 Click Execute. Managing The Physical Disk Power Does my controller support this feature? See Supported Features.
Property Definition Automatic Disk Power Saving (Idle C) Enables or disables the Automatic Disk Power Saving (Idle C) feature for additional power saving. When enabled, it enables the new generation power savings without affecting the legacy drives. Time Interval for Spin Down Sets the time interval after which the hot spares and unconfigured drives spins down.
3 Click Apply Changes. NOTE: The Enable Quality of Service Settings option is enabled only if the Spin Down Configured Drives option is enabled. To Locate Manage Physical Disk Power In Storage Management 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Select a controller object. 3 Click Information/Configuration on the controller Properties page. 4 Select Manage Physical Disk Power from the Available Tasks drop-down menu.
Encryption Key Identifier An Encryption Key Identifier is a user-supplied text label for the Passphrase. The identifier helps you determine which Passphrase to provide while authenticating import of foreign encrypted SED drives. Passphrase A Passphrase is a user supplied string that the controller uses to create the encryption key. NOTE: For more information on Encryption Key and Passphrase guidelines, click the page.
To change the encryption key, type the New Encryption Key Identifier and Passphrase. You are prompted to authenticate the current Passphrase. Ensure that you read the note on the importance of passphrase and consequences of not saving the same, before applying the changes. When you change the encryption key, the existing configuration on the controller is updated to use the new encryption key.
Converting To Non-RAID Disks On supported PERC adapters: Does my controller support this feature? See Supported Features. NOTE: This task is not supported on PERC hardware controllers running in HBA mode. 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Select the Controller object. 3 Click Information/Configuration on the controller Properties page. 4 In the Controller Tasks drop-down menu, select Convert to Non-RAID.
3 Click Information/Configuration on the controller Properties page. 4 In the Controller Tasks drop-down menu, select Change Controller Mode..., and then click Execute. The Change Controller Mode window is displayed. The Current Controller Mode section displays the mode of the controller – RAID or HBA or Enhanced HBA. 5 Select RAID or HBA or Enhanced HBA from the Change Controller Mode section, and then click Apply Changes.
4 In the Controller Tasks drop-down menu, select Auto Configure RAID0, and then click Execute. The Auto Configure RAID0 window is displayed. Read the messages displayed on this window before you proceed. 5 Click Confirm to configure the physical disks. The auto configure operation may take time to complete, depending on the configuration and available physical disks in Ready state. The Auto Configure RAID0 operation is successful, only if the Alert Log is updated.
Global PERC Tasks H730P Name Adapte r/Mini Monoli thic PERC H740P Adapter /Mini Monolit hic PERC H730 Adapter /Mini Monolit hic PERC PERC H330 H840 Adapter Adapter /Mini Monolith ic PERC HBA 330 Adapter/ Mini PERC 12 GBPS SAS HBA PERC H730P MX PERC H745P MX PERC PERC PERC HBA 330 HBA 330 S140 MX MMZ Settin No g Hot Spare Prote ction Policy No No No No No No No No No No No Settin No g RRW E Thres hold No No No No No No No No No No No Settin No g Availa ble Spare Thres hold N
Controller Tasks Supported When System Configuration Lock Down Mode Is On Table 15.
Controll er Reports Name PERC H730P Adapter/ Mini Monolith ic PERC H740P Adapter/ Mini Monolith ic PERC H730 Adapter /Mini Monolit hic PERC H330 Adapter /Mini Monolit hic PERC H840 Adapte r PERC HBA 330 Adapter/ Mini PERC 12 GBPS SAS HBA PERC H730P MX PERC H745P MX PERC HBA 330 MX PERC HBA 330 MMZ Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes View Yes Physical Disk Firmwar e Version Report Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Consist ency Report View Slot Occupa ncy Report
Physical Disk Tasks Supported When System Configuration Lock Down Mode Is On Table 19.
Table 22. Virtual Disk Tasks Supported When System Configuration Lock Down Mode Is On Virtual Disk Tasks Name PERC H730P MX PERC H745P MX PERC HBA 330 MX PERC HBA 330 MMZ PERC S140 Check Consistency Yes Yes Yes Yes Yes Blink Yes Yes Yes Yes Yes Unblink Yes Yes Yes Yes Yes NOTE: Depending on the RAID level, the Check Consistency task is allowed for different PERC controllers.
The check consistency report provides information on all the consistency checks performed on the controller in a chronological order. It provides information such as last run time and result. If the consistency check fails, it provides the reason for the failure. To Locate View Check Consistency Report In Storage Management 1 In the Server Administrator window, under the system tree, click Storage. 2 Select View Check Consistency Report from the Select Report drop-down menu. 3 Click Execute.
Table 23. Path between Controller and Enclosure 1 Health of Logical Connector Path between Controller and Enclosure 1 Connector 0 (C0) Connector 1 (C1) Available Available Available Disconnected Disconnected Available However, if the communication channel between any two enclosures is lost, the redundant path configuration is degraded and the health of the logical connector is displayed as degraded. For a brief outline of this scenario, see the following table. Table 24.
NOTE: To generate the HDD firmware version report, negotiable speed and the model number of the drives are used as keys for indexing entries in the hddfwver.csv file. If the negotiable speed of the drive is not available from the controller, then the model number of the drive is used as the key for indexing entries in the hddfwver.csv file. You can run the report on each controller basis or for the storage system.
Property Definition Nautilus EFI Nautilus is the tool that is used for offline firmware updates. Nautilus EFI is the version of the tool that works on 11th generation of supported servers. This tool updates multiple drive types with a single scan and updates procedure boot and runs from a USB key. If the Nautilus EFI column has a part number, then that drive is shipped on an 11th generation server.
8 Support For PERC 9 and PERC 10 Hardware Controllers The PowerEdge RAID Controller (PERC) family of enterprise-class controllers is designed for enhanced performance, increased reliability and fault tolerance, and simplified management — providing a powerful, easy-to-manage way to create a robust infrastructure and help maximize server uptime. The introduction of the PERC 9 and PERC 10 family of hardware controllers also brings about improvements in storage solutions.
RAID Level 10 Virtual Disk Creation With Uneven Span RAID Level 10 virtual disk creation with uneven span feature is available on Storage Management User Interface (UI) and Command Line Interface (CLI). For information on Storage Management CLI, see Server Administrator Command Line Interface Guide. • Based on the minimum (and even) number of physical disks selection the firmware on the PERC 9 hardware controller recommends the preferred span layout.
• When you create a virtual disk using the Advanced Wizard, you can select the physical disk sector from the Sector Size drop-down list. The options available are: – 512B – 4KB • You cannot use both 4KB sector hard-disk drives and 512B sector hard-disk drives for a virtual disk creation as mixing of hard-disk drive sectors is not allowed in Storage Management.
9 Support for BOSS-S1 RAID Controllers All Operating Systems compatible to OM 9.0.1 are supported by BOSS-S1 RAID Controllers except ESXi family of OSes. The BOSS-S1 RAID Controllers supports the following enumeration and monitoring operations: • The physical disks are (M.2 devices) are directly connected to the Controller • Enumeration of Physical Disks (M.2 devices) are supported • Enumeration of Virtual Disks on M.2 devices are supported NOTE: Storage Management updates the M.
10 Enclosures And Backplanes Physical disks can be contained in an enclosure or attached to the backplane of a system. An enclosure is attached to the system externally while the backplane and its physical disks are internal. Topics: • • • • • Backplanes Enclosures Enclosure Management Identifying An Open Connector On The Enclosure Enclosure Components Backplanes You can view the Backplane object by expanding the controller in the Storage Management tree view.
Storage management allows hot plugging of enclosures. Hot plugging is defined as the adding of a component to a system while the operating system is still running. NOTE: This feature requires that the physical devices connected to the controller have the latest firmware. For the latest supported firmware, contact your service provider. After you hot plug or hot reconfigure an enclosure, refresh the left tree to display the change in status and configuration; a system reboot is not required.
Enclosure Physical Disks The physical disks in an enclosure are displayed under the enclosure object in the tree view. Select a disk in the tree to view the status information. Enclosure Fans The fans are a component of the enclosure cooling module. The enclosure fans are displayed under the Fans object in the tree view. You can select a fan to view the status information. Fan Properties Table 26.
Enclosure Power Supplies The enclosure power supplies are displayed under the Power Supplies object in the tree view. You can select the Power Supplies object to view the status information. Power Supply Properties Table 27. Power Supply Properties Property Definition Status These icons represent the severity or health of the storage component. — Normal/OK — Warning/Non-critical — Critical/Failure/Error For more information, see Storage Component Severity. Name Displays the name of the power supply.
Setting The Temperature Probe Properties And Tasks Click Set Temperature Probe to launch the wizard for changing the temperature probe’s Warning threshold. You can change the Warning threshold for each of the temperature probes included in the enclosure. To Launch The Set Temperature Probe Wizard To launch the Set Temperature Probe wizard: 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Expand a controller object.
Property Definition • • • • Minimum Warning Threshold Exceeded — The temperature of the enclosure has dropped below the minimum warning threshold. Maximum Warning Threshold Exceeded — The temperature of the enclosure has exceeded above the maximum warning threshold. Missing — The temperature probe is not present in the enclosure. Inactive — The temperature probe is present in the enclosure, but the EMM that it monitors is not installed.
EMM Properties Table 29. EMM Properties Property Definition Status These icons represent the severity or health of the storage component. — Normal/OK — Warning/Non-critical — Critical/Failure/Error — Unknown For more information, see Storage Component Severity. Name Displays the name of the EMM. State Displays the current state of the EMMs. Possible values are: • • • • • Ready — EMM is functioning normally. Degraded — EMM has encountered a failure and is operating in a degraded state.
Enclosure And Backplane Health Displays the status of the enclosure or backplane and the components attached to the enclosure or backplane. Enclosure And Backplane Information For information on enclosures and backplanes, see: • Enclosures And Backplanes • Enclosure And Backplane Properties • Enclosure And Backplane Tasks Enclosure And Backplane Components For information on attached components, see Physical Disks Or Physical Devices.
Property Definition State Displays the status of the enclosure or backplane. Possible values are: • • • Ready — The enclosure or backplane is functioning normally. Degraded — The enclosure has encountered a failure and is operating in a degraded state. This state does not apply to backplanes. Failed — The enclosure or backplane has encountered a failure and is no longer functioning. Connector Displays the number of connectors attached to the enclosures or backplanes.
Property Definition Asset Name Displays the name assigned to the enclosure. You can change this property using the Setting Asset Data task. Backplane Part Number Displays the part number of the enclosure backplane. SAS Address Displays the SAS address of the SAS backplane. Split Bus Part Number Displays the part number of the enclosure split bus module. A split bus is indicated by a single triangle symbol on the back of the enclosure.
Setting Asset Data Does my enclosure support this feature? See Supported Features. You can change the asset tag and asset name of the enclosure. The new asset tag and asset name that you specify are displayed on the Information/Configuration of the enclosure. Changing The Asset Tag And Asset Name Of An Enclosure To change the asset tag and asset name of the enclosure: 1 Type the new asset tag name in the New asset tag field.
The View Occupancy Slot Report task allows you to view empty slots, occupied slots, or slots split by the backplane zoning functionality of the selected enclosure. The report provides a diagram that represents the occupancy of physical drive slots. Move the mouse over each slot to view details, such as physical disk ID, state, and size. For more information on flexible backplane zoning, see Backplanes.
connector not currently attached to storage. Storage Management displays a number for each connector. These numbers correspond to the connector numbers on the controller hardware. You can use these numbers to identify which open connector displayed in the tree view with the open connector on the controller hardware.
11 Connectors A controller contains one or more connectors (channels or ports) to which you can attach disks. You can externally access a connector by attaching an enclosure (for external disks) to the system or internally access by attaching to the backplane (for internal disks) of a system. You can view the connectors on the controller by expanding the controller object in the tree view.
Creating A Physical Disk For Channel Redundant Virtual Disks On PERC Controllers The following sections describe creating a channel-redundant virtual disk using RAID 10 or RAID 50 on PERC controllers. Creating A Channel-Redundant Virtual Disk Using RAID 10 To create a channel-redundant virtual disk using RAID 10: 1 Select one physical disk on each of the two channels. 2 Select an additional disk on each of the two channels. You have now selected the minimum number of disks for a RAID 10.
Property Definition — Normal/OK — Warning/Non-critical — Critical/Failure/Error For more information, see Storage Component Severity. A Warning or Critical severity may indicate that the connector is unable to communicate with attached devices such as an enclosure. Check the status of attached devices. For more information, see Cables Attached Correctly and Isolate Hardware Problems. Name Displays the connector number. State Displays the status of the connector.
Property Definition — Critical/Failure/Error For more information, see Storage Component Severity. A Warning or Critical severity may indicate that the connector is unable to communicate with attached devices such as an enclosure. Check the status of attached devices. For more information, see Cables Attached Correctly and Isolate Hardware Problems. Name Displays the connector number. The default value is 0. State Displays the status of the connector.
12 Tape Drive Tape drives contain several tape backup units (TBUs) on which data can be backed up. Storage Management enumerates the TBUs that are used for data back up. You can view the tape drives associated with a particular controller on the Tape Drives on Controller page. Tape Drive Properties Table 33. Tape Drive Properties Property Definition ID Displays the ID of the tape drive. Name Displays the name of the tape drive. Bus Protocol Displays the bus protocol type of the tape drive.
13 RAID Controller Batteries Some RAID controllers have batteries. If the controller has a battery, Storage Management displays the battery under the controller object in the tree view. If there is a power outage, the controller battery preserves data that is in the volatile cache memory (SRAM) but not yet written to disk. The battery is designed to provide a minimum backup of 24 hours. When a RAID controller is first installed in a server, the battery may need charging.
Property Definition When the battery is in Warn mode, the state of the controller is displayed as degraded. NOTE: Warn is available only on SAS controllers with firmware version 6.1 and later. Next Learn Time Displays the number of days and hours left before the controller firmware initiates the next learn cycle. Maximum Learn Delay Displays the maximum number of days and hours that you can delay the battery learn cycle. The controller firmware automatically initiates the battery learn cycle.
14 Physical Disks Or Physical Devices Physical disks or physical devices reside within an enclosure or are attached to the controller. On a RAID controller, physical disks or devices are used to create virtual disks.
For SAS Controllers For SAS controllers, you must: 1 Check the alert log for an alert verifying that the system has identified the new disk. You may receive alert 2052 or 2294. For information on alert messages, see the Server Administrator Messages Reference Guide. 2 Refresh the display by clicking Refresh ( ) or by changing pages. NOTE: Clicking the Refresh button in the right pane refreshes only the right pane.
5 Restore the backed up data from the original virtual disk onto the newly created virtual disk. Other Disk Procedures • Replacing A Failed Disk • Recovering From Removing The Wrong Physical Disk • Moving Physical And Virtual Disks From One System To Another • Troubleshooting Physical Disk Or Physical Device Properties To view information about physical disks or physical device and perform physical disk or physical device tasks, use the Physical Disk Or Physical Device Properties page.
Property Definition • • • • • • • • • • • • • • Online — Indicates that the physical disk is part of a virtual disk and is functioning normally. For more information, see Setting Online And Offline. NOTE: For all NON-Raid Disks for systems running on Enhanced HBA mode will have the status displayed as Online. Degraded — The physical disk or device has encountered a failure and is operating in a Degraded state.
Property Definition • • • • • Select as part of a virtual disk. Assign a hot spare. Choose as source or target for rebuild, copyback, replace member, or reconstruct. Spun down to save power. Select as a bootable device. Certified Displays whether the physical disk or device is certified by your service provider. Mirror Set ID Displays the mirror set ID of the member physical disk or device that has duplicated data from another physical disk or device. Capacity Displays the capacity of the disk.
Property Definition • Remaining Rated Write Endurance Unknown — Storage Management is unable to determine the media type of the physical disk or device. Displays information on the SSD renewal/replacement based on the amount of write workloads. This field indicates the total remaining programs or erase-cycles available on the SSD, based on the cumulative specification of the total NAND (Negated AND or NOT AND) Flash chips in the SSD.
Property Definition Non-RAID Disk cache policy Displays the cache policy of the NON-RAID disk. For the Non-RAID physical disk the Non-RAID disk cache policy property can be changed to unchanged, enable, or disable. NOTE: This feature is not available from PERC 10 or later. Available Spare Displays the available spare value set for all SSDs (SAS / SATA). New disk will have 100% spare which comes down as per the usage.
NOTE: The Blink and Unblink tasks are only supported for hotswap physical disks (disks that reside in a carrier). When using an Broadcom PCIe U320 controller, the Blink and Unblink tasks apply to physical disks contained in carriers that can be inserted into a server or an enclosure. If the physical disk is not contained in a carrier but is instead designed to be connected with a SCSI cable (typically a ribbon cable), then the Blink and Unblink tasks are disabled.
Select the Cancel Rebuild task to cancel a rebuild that is in progress. If you cancel a rebuild, the virtual disk remains in a Degraded state. The failure of an additional physical disk can cause the virtual disk to fail and may result in data loss. It is recommended that you rebuild the failed physical disk as soon as possible. NOTE: If you cancel the rebuild of a physical disk that is assigned as a hot spare, reinitiate the rebuild on the same physical disk in order to restore the data.
To Locate Online Or Offline In Storage Management To locate this task in storage management: 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Expand a controller object. 3 Expand a connector object. 4 Expand the enclosure or backplane object. 5 Select the Physical Disks object. 6 Select Online or Offline from the Tasks drop-down menu of the physical disk you want to make online or offline. 7 Click Execute.
If Revertible Hot Spare is enabled and the physical disk is SMART-enabled, the controller firmware automatically starts copying data from the SMART-enabled disk in the virtual disk to the hot spare. NOTE: To use the Revertible Hot Spare task, ensure that you have assigned a hot spare to the virtual disk. NOTE: If the disk is not SMART-enabled or if the Auto Replace on Predictive Failure option is disabled, the failed disk is not replaced automatically.
5 Select the Physical Disk object. 6 Select Cryptographic Erase from the Tasks drop-down menu of the physical device you want to clear. 7 Click Execute. After the task is completed, the Alert Log is populated. Convert To RAID Capable Disk This task enables a disk for all RAID operations. NOTE: This task is not supported on PERC hardware controllers running in HBA mode. NOTE: This task is not supported on PERC 10 controllers. Convert To Non-RAID Disk This task converts a disk to a Non-RAID disk.
15 Virtual Disks A virtual disk refers to a storage created by a RAID controller from one or more physical disks. Although a virtual disk may be created from several physical disks, it is viewed by the operating system as a single disk. Depending on the RAID level used, the virtual disk may retain redundant data if there is a disk failure or have particular performance attributes. NOTE: Virtual disks can only be created on a RAID controller.
Considerations Before Creating Virtual Disks Different controllers have particular characteristics in the way they implement virtual disks. These characteristics may include use of disk space, limitations on the number of virtual disks per controller, and so on. It can be helpful to understand these characteristics before creating virtual disks on the controller.
the physical disks are of equal size. In addition, when the physical disks are of equal size and you use the leftover space for a second virtual disk, this new virtual disk cannot expand to include any physical disks not included in the original virtual disk. • Space allocation when deleting and creating virtual disks on controllers — When you delete a virtual disk, you free up or make available space on the physical disks that was being used by the deleted virtual disk.
the number of total stripes and spans is limited, the number of physical disks that can be used is also limited. The limitations on stripes and spans affect the possibilities for concatenation and RAID levels as follows: • Maximum number of spans affects RAID 10, RAID 50, and RAID 60. • Maximum number of stripes affects RAID 0, RAID 5, RAID 50, RAID 6, and RAID 60. • Number of physical disks in a mirror is always 2. This property affects RAID 1 and RAID 10.
Creating Virtual Disks Does my controller support this feature? See Supported Features. In order to implement RAID functions, you must create a virtual disk. A virtual disk refers to storage created by a RAID controller from one or more physical disks. Although a virtual disk may be created from several physical disks, it is seen by the operating system as a single disk. Before creating a virtual disk, you should be familiar with the information in Considerations Before Creating Virtual Disks.
Controller Blades, PERC H710P Mini Monolithic, PERC H810 Adapter, PERC H330 Adapter, PERC H330 Mini Monolithic, PERC H330 Mini Blades, PERC H330 Embedded, PERC H730 Adapter, PERC H730 Mini Monolithic, PERC H730 Mini Blades, PERC H730P Adapter, PERC H730P Mini Monolithic, PERC H730P Mini Blades, PERC H730P Slim, PERC H740P Adapter, PERC H740P Mini Monolithic, PERC H830 Adapter, PERC H840 Adapter, PERC H730P MX, PERC H745P MX and PERC FD33xD/FD33xS PERC S100, S110, S130, S140 and S300 Starting RAID Level T
Controller Starting RAID Level Target RAID Level Comments RAID 6 requires a minimum of 4 disks.
• Consistency check • Rebuild • Virtual disk format • I/O • Patrol Read Recovering a physical disk bad block depends on the RAID level and state of the virtual disk. If a virtual disk is redundant, the controller can recover a bad block on a physical disk. If a virtual disk is not redundant, then the physical disk bad block results in a virtual disk bad block. Table 38.
One of the following scenarios may occur: • Backup operation fails on one or more files. In this case, restore the file from a previous backup. After restoring the file, proceed to step 2. • Backup operation completes without error. This indicates that there are no bad blocks on the written portion of your virtual disk. If you still receive bad block warnings, the bad blocks are in a non-data area. Proceed to step 2.
Property Definition • • • • • • • • Regenerating — A physical disk in the virtual disk is rebuilding. Reconstructing — The virtual disk configuration has changed. The physical disks included in the virtual disk are being modified to support the new configuration. Failed — The virtual disk has encountered a failure of one or more components and is no longer functioning. Failed Redundancy — This state is displayed when the initial consistency check for the virtual disk is canceled or is not successful.
Property Definition NOTE: You cannot have a mix of HDD and SSD media on a virtual disk. Also, you cannot have a mix of SAS and SATA drives on the virtual disk. Read Policy Displays the read policy that the controller is using for the selected virtual disk. See RAID Controller Read, Write, Cache, and Disk Cache Policy. Write Policy Displays the write policy that the controller is using for the selected virtual disk. See RAID Controller Read, Write, Cache, and Disk Cache Policy.
• Replacing A Member Disk • Clearing Virtual Disk Bad Blocks • Encrypting A Virtual Disk Reconfiguring A Virtual Disk Does my controller support this feature? See Supported Features. The Reconfigure task enables you to change the virtual disks properties. For example, you can use this task to add physical disks or change the RAID level. Format, Initialize, Slow, And Fast Initialize Does my controller support this feature? See Supported Features.
Performing A Check Consistency Does my controller support this feature? See Supported Features. The Check Consistency task verifies the accuracy of the redundant (parity) information. This task only applies to redundant virtual disks. When necessary, the Check Consistency task rebuilds the redundant data. If the virtual disk is in a Failed Redundancy state, running a check consistency may be able to return the virtual disk to a Ready state.
Canceling A Rebuild Does my controller support this feature? See Supported Features. Select the Cancel Rebuild task to cancel a rebuild that is in progress. If you cancel a rebuild, the virtual disk remains in a Degraded state. The failure of an additional physical disk can cause the virtual disk to fail and may result in data loss. It is recommended that you rebuild the failed physical disk as soon as possible.
The Encrypt Virtual Disk task encrypts an unencrypted virtual disk.
5 Click Continue. Create Virtual Disk Express Wizard Step 2 The Create Virtual Disk Express Wizard - page displays the summary of attributes of the selected RAID level. The attributes include Bus Protocol, Stripe Element Size, Read Policy, and the selected physical disk. The default values of the virtual disk attributes excluding the RAID level are recommended for the selected RAID level. 1 In the Name field, type a name for the virtual disk.
To create a virtual disk using the Create Virtual Disk Advanced Wizard: 1 On the left-hand side of the Server Administrator page, expand Storage. 2 Click on the . 3 Click on Virtual Disks. The Virtual Disk(s) on Controller page is displayed. 4 Click Go to the Create Virtual Disk Wizard. The Create Virtual Disk Wizard (Step 1) page is displayed. 5 Select the Advanced Wizard option.
◦ Within the enclosure with a physical disk of acceptable size difference. ◦ Across connectors at the same level of enclosure and of acceptable size difference. ◦ Across connectors in the enclosure that are not at the same level of the enclosure but with a physical disk of acceptable size difference. If the size difference is not acceptable, the disk is not mirrored and hence dropped from the span. The number of spans and disks in the span is recalculated.
• Physical disk 0:4:0 Physical Disks Selected The Physical Disks Selected section of the page displays the disks you have chosen. In this example, two disks are selected. • Physical disk 0:0:0 • Physical disk 0:1:0 Each RAID level has specific requirements for the number of disks that must be selected. RAID 10, RAID 50, and RAID 60 also have requirements for the number of disks that must be included in each stripe or span. If the controller is a SAS controller with firmware versions 6.
In some cases, the virtual disk is slightly larger than the size you specify. The Create Virtual Disk Wizard adjusts the size of the virtual disk to avoid rendering a portion of the physical disk space unusable. NOTE: If a physical disk is receiving a SMART alert, it cannot be used in a virtual disk. NOTE: For a controller that has more than one channel, it may be possible to configure a virtual disk that is channelredundant.
Span Edit In the edit mode, you cannot alter the number of physical disks per span. If there are enough available physical disks, you can reduce or increase the number of spans. You can also alter the contents of a span by removing the span and selecting a new physical disk to comprise that span. To successfully create a virtual disk, a minimum of two spans must exist always. NOTE: If you select Span Edit, Intelligent Mirroring that is already been applied becomes invalid.
4 Select Reconfigure from the Available Tasks drop-down box. 5 Click Execute. Virtual Disk Task - Reconfigure Step 2 of 3 Does my controller support this feature? See Supported Features. The virtual disk reconfigure Step 2 page enables you to select the RAID level and size for the reconfigured virtual disk. The Expand Capacity option appears only for PERC H730P MX and PERC H745P MX controllers with firmware version 7.1 or later.
3 Click Continue to go to the next page or Exit Wizard if you want to cancel. To Reconfigure A Virtual Disk Expand Virtual Disk Capacity - Step 2 of 3 NOTE: For RAID 10 partial virtual disks, there are only two methods to increase the disk size or capacity: 1 • Expanding the capacity by increasing the percentage value. • Adding disks into the original RAID 10 virtual disk. Enter the percentage of the free disk size available by which you want to expand the virtual disk capacity.
The Slow Initialize task initializes one physical disk at a time. Each physical disk displays the Clear state while being initialized. While the physical disk is in the Clear state, the Cancel Clear physical disk task is available. Performing a Cancel Clear task on the physical disk causes the Slow Initialize task to be canceled for the entire virtual disk and all member physical disks.
• If you delete a virtual disk and immediately create a new virtual disk with all the same characteristics as the one that was deleted, the controller recognizes the data as if the first virtual disk were never deleted. In this situation, if you don't want the old data after recreating a new virtual disk, reinitialize the virtual disk. • On deleting NON-Raid Disks from the Virtual Disk tab for systems running on Enhanced HBA mode, the corresponding physical disk displays as Ready State.
Changing The Read, Write, Or Disk Cache Policy Of A Virtual Disk 1 Select the new policy from the Read Policy, Write Policy, and Disk Cache Policy drop-down menus. 2 Click Apply Changes. To exit without changing the virtual disk policy, click Go Back To Virtual Disk Page. To Locate Change Policy In Storage Management 1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects. 2 Expand a Controller object. 3 Select the Virtual Disks object.
Use the Unmirror task to separate mirrored data and restore one half of the mirror to free space. Unmirroring a RAID 1 or RAID 1concatenated virtual disk results in a single, nonredundant concatenated virtual disk. Unmirroring a RAID 10 virtual disk results in a single, nonredundant RAID 0 (striped) virtual disk. Data is not lost during this operation. NOTE: On systems running Linux operating systems, an Unmirror cannot be performed on a mounted virtual disk. To Unmirror Click Unmirror.
Unassigning A Dedicated Hot Spare 1 Select the disk in the Disks currently configured as dedicated hot spare table to unassign it. On some controllers, more than one disk can be selected. Clicking the disk removes the disk from the Disks currently configured as dedicated hot spare table and returns it to the Connector (channel or port) table. 2 Click Apply Changes when ready.
NOTE: For PERC H330, H730, H730P, H730P MX, H740P, H745P MX and H840 controllers, if any of the drives you selected is in the spun down state, the following message is displayed: The below listed physical drive(s) are in the spun down state. Executing this task on these drive(s) takes additional time, because the drive(s) need to spun up. The message displays the ID(s) of the spun down drive(s).
16 Moving Physical And Virtual Disks From One System To Another This section describes how to move physical and virtual disks from one system to another. Topics: • Required Conditions • Migrating SAS Virtual Disks To Another System Required Conditions SAS Controllers Virtual disks can only be migrated to a controller that is using the same technology. For example, virtual disks on a SAS controller must be migrated to a SAS controller.
17 Protecting Your Virtual Disk With A Hot Spare When you create a virtual disk using a RAID controller, it enables the system to continue functioning even during a disk failure. This feature can be enabled by assigning a hot spare to the virtual disk. When a disk fails, the redundant data is rebuilt onto the hot spare without interrupting system operations.
Property Definition Severity Level Displays the severity level you want to assign to the generated alert, if this policy is violated. NOTE: The status of the virtual disk is determined by the severity level you specify for this policy. Resetting The Hot Spare Protection Policy Clear RAID Layout to reset the dedicated hot spare protection policy. Global Hot Spare Protection Policy Table 41.
18 Troubleshooting This section contains troubleshooting procedures for common situations as well as for specific problems. Topics: • Common Troubleshooting Procedures • Virtual Disk Troubleshooting • Specific Problem Situations And Solutions • PCIe SSD Troubleshooting Common Troubleshooting Procedures This section describes commands and procedures that can be used in troubleshooting.
NOTE: You can verify which firmware and drivers are installed by selecting the Storage object in the tree view and clicking Information/Configuration. You can also check the Alert Log for alerts relating to unsupported firmware and driver versions. It is also recommended to obtain and apply the latest server system BIOS on a periodic basis to benefit from the most recent improvements. For more information on server system BIOS, see the system documentation.
Replacing A Failed Physical Disk That Is Part Of A Non-Redundant Virtual Disk If the failed physical disk is part of a nonredundant virtual disk (such as RAID 0), then the failure of a single physical disk causes the entire virtual disk to fail. To proceed, you need to verify when a backup was taken, and if there is any new data that has been written to the virtual disk since that time. If you have backed up recently and there is no new data on the disks that would be missed, you can restore from backup.
Resolving Microsoft Windows Upgrade Problems If you upgrade the Microsoft Windows operating system on a server, you may find that Storage Management no longer functions after the upgrade. The installation process installs files and updates registry entries on the server that are specific to the operating system. Changing the operating system can disable Storage Management. To avoid this problem, you should uninstall Storage Management before upgrading.
The rebuild may also report sense key errors. In this situation, take the following actions to restore the maximum data possible: 1 Back up the degraded virtual disk onto a fresh (unused) tape drive. • If the backup is successful — If the backup completes successfully, then the user data on the virtual disk has not been damaged. In this case, you can continue with step 2.
Problems Associated With Using The Same Physical Disks For Both Redundant And Non-Redundant Virtual Disks When creating virtual disks, you should avoid using the same physical disks for both redundant and nonredundant virtual disks. This applies to all controllers. Using the same physical disks for both redundant and nonredundant virtual disks can result in unexpected behavior including data loss.
This damage is discovered when the controller performs an operation that requires scanning the disk. Examples of operations that may result in these alerts are as follows: • Consistency check • Rebuild • Virtual disk format • I/O If you receive alerts 2146 through 2150 as the result of performing a rebuild or while the virtual disk is in a degraded state, then data cannot be recovered from the damaged disk without restoring from the backup.
A Corrupt Disk Or Drive Message Suggests Running Autocheck During A Reboot You can ignore the message and perform autocheck. The reboot completes after autocheck is completed. Depending on the size of your system, it may take about 10 minutes. Erroneous Status And Error Messages After A Windows Hibernation Activating the Windows hibernation feature may cause Storage Management to display erroneous status information and error messages.
Reconfiguring A Virtual Disk Displays Error In Mozilla Browser When reconfiguring a virtual disk using the Mozilla browser, the following error message may display: Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. You can disable this error message by changing the settings in the browser. To disable this error message: 1 Select Edit > Preferences. 2 Click Privacy and Security. 3 Click SSL.
PCIe SSD Is Not Visible In Disk Management In The Operating System Probable Cause: Device driver is not installed. Solution: 1 Download the latest PCIe SSD driver from the support site. 2 Open Device Manager and double-click Other Devices where the PCIe device displays a Yellow mark. 3 Right-click and install the driver on the instance. For more information on possible error conditions with your PCIe SSD, see the system-specific Owner's Manual.
19 Frequently Asked Questions This section provides frequently asked questions that address situations commonly experienced in a storage environment.
How Do I Recover From Removing The Wrong Physical Disk For more information, see Recovering From Removing The Wrong Physical Disk. How Do I Identify The Firmware Version That Is Installed The properties information of the controller displays the firmware version that is installed on the controller. From the Storage tree view object, you can display the firmware version for all controllers attached to the system. You can also view this information in the Information/Configuration page of the controller.
20 Supported Features Different controllers support different features. The tasks displayed by the Storage Management menus and other features vary depending on whether the controller supports the feature. This chapter lists the features supported by the controllers. For more information on Controllers, see your hardware documentation. NOTE: The order of the controllers displayed on Storage Management may differ with the order of the controllers displayed in the Human Interface (HII) and PERC Option ROM.
• Connector Tasks • Physical Disk Tasks • Virtual Disk Tasks • Virtual Disk Specifications • Supported RAID Levels • Read, Write, Cache And Disk Cache Policy Controller Tasks Supported On PERC Hardware Controllers Table 42.
Controller Task Name PE RC H8 00 PE RC H8 10 Ad ap ter PERC H700 Adapt er/ Integr ated PER C H70 0 Mod ular PERC H710 Adapt er/ Mini Mono lithic/ Mini Blade PER C H710 P Adap ter PER C H31 0 Ada pter / Mini Blad e/ Mini Mo nolit hic PER C H730 P Adap ter/ Mini Mono lithic /Mini Blade s/ Slim PER C H730 Adap ter/ Mini Mon olithi c/ Mini Blade s PER C H740 P Adap ter/ Mini Mon olithi c PERC H330 Adapte r/Mini Monoli thic/ Mini Blades / Embed ded PER C H830 Adap ter PER C H840 Adap ter PERC PERC
Controller Task Name PE RC H8 00 PE RC H8 10 Ad ap ter PERC H700 Adapt er/ Integr ated PER C H70 0 Mod ular PERC H710 Adapt er/ Mini Mono lithic/ Mini Blade PER C H710 P Adap ter PER C H31 0 Ada pter / Mini Blad e/ Mini Mo nolit hic PER C H730 P Adap ter/ Mini Mono lithic /Mini Blade s/ Slim PER C H730 Adap ter/ Mini Mon olithi c/ Mini Blade s PER C H740 P Adap ter/ Mini Mon olithi c PERC H330 Adapte r/Mini Monoli thic/ Mini Blades / Embed ded PER C H830 Adap ter PER C H840 Adap ter Hot-plug o
Controller Task Name PE RC H8 00 PE RC H8 10 Ad ap ter PERC H700 Adapt er/ Integr ated PER C H70 0 Mod ular PERC H710 Adapt er/ Mini Mono lithic/ Mini Blade PER C H710 P Adap ter PER C H31 0 Ada pter / Mini Blad e/ Mini Mo nolit hic PER C H730 P Adap ter/ Mini Mono lithic /Mini Blade s/ Slim PER C H730 Adap ter/ Mini Mon olithi c/ Mini Blade s PER C H740 P Adap ter/ Mini Mon olithi c PERC H330 Adapte r/Mini Monoli thic/ Mini Blades / Embed ded PER C H830 Adap ter PER C H840 Adap ter PERC PERC
Controller Task Name PERC H730P MX PERC H745P MX Rescan Controller No No Create Virtual Disk Yes Yes Export Log File Yes Yes Clear Foreign Configuration Yes Yes Import Foreign Configuration Yes Yes Import/Recover Foreign Configuration Yes Yes Set Patrol Read Mode Yes Yes Start Patrol Read Yes Yes Convert RAID To Non-RAID Yes No Convert Non- RAID To RAID Yes No Replace Member Yes Yes Import Preview of Foreign Configuration Yes Yes Hot-plug of Enclosures No No Change
Battery Tasks Supported On PERC Hardware Controllers Table 44.
Connector Tasks Supported By PERC Hardware Controllers Table 46.
Physi cal Disk Task Name PE RC H8 00 PE RC H81 0 Ada pter PERC H700 Adapter/ Integrate d PER C H70 0 Mod ular PERC H710 Adapte r/Mini Blade/ Mini Monoli thic PER C H71 0P Ada pter PERC H310 Adapt er/ Mini Blade /Mini Monol ithic PERC H730P Adapter /Mini Monolit hic/ Mini Blades/ Slim PERC H730 Adapt er/ Mini Mono lithic/ Mini Blade s PERC H740 P Adapt er/ Mini Mono lithic PERC H330 Adapte r/Mini Monoli thic/ Mini Blades / Embed ded PER C H83 0 Adap ter PER C H84 0 Adap ter PE PERC RC H730 FD P
Physi cal Disk Task Name PE RC H8 00 PE RC H81 0 Ada pter PERC H700 Adapter/ Integrate d PER C H70 0 Mod ular PERC H710 Adapte r/Mini Blade/ Mini Monoli thic PER C H71 0P Ada pter PERC H310 Adapt er/ Mini Blade /Mini Monol ithic PERC H730P Adapter /Mini Monolit hic/ Mini Blades/ Slim PERC H730 Adapt er/ Mini Mono lithic/ Mini Blade s PERC H740 P Adapt er/ Mini Mono lithic PERC H330 Adapte r/Mini Monoli thic/ Mini Blades / Embed ded PER C H83 0 Adap ter PER C H84 0 Adap ter PE PERC RC H730 FD P
Virtual Disk Tasks Supported By PERC Hardware Controllers Table 50.
Virtual Disk Task Name PE RC H8 00 PE RC H8 10 Ad apt er PERC H700 Adapter / Integrat ed/ Modula r PERC H710 Adapt er/ Mini Monol ithic/ Mini Blade PERC H710 P Adapt er/ Mini Blade /Mini Mono lithic PERC H310 Adapt er/ Mini Blade /Mini Monol ithic PERC H730 P Adapt er/ Mini Monoli thic/ Mini Blades /Slim PERC H730 Adapte r/ Mini Monoli thic/ Mini Blades PERC H740P Adapte r/ Mini Monoli thic PERC H330 Adapte r/ Mini Monoli thic/ Mini Blades / Embed ded PE RC H8 30 Ad apt er PE RC H8 40 Ad apt er
Virtual Disk Task Name PERC H730P MX PERC H745P MX Create Virtual Disk Advanced Wizard Yes Yes Create Virtual Disk Express Wizard Yes Yes Rename Yes Yes Blink/Unblink Yes Yes Reconfigure Yes Yes Change Policy Yes Yes Split Mirror No No Unmirror No No Delete Virtual Disk Yes Yes Check Consistency Yes Yes Cancel Check Consistency Yes Yes Pause Check Consistency No No Resume Check Consistency No No Cancel Background Initialization (BGI) Yes Yes Format Virtual Disk
Virtual Disk Specifications For PERC Hardware Controllers Table 52.
Virtual Disk Specif icatio n PE RC H8 00 PE RC H8 10 Ad apt er PERC H700 Adapter / Integrat ed/ Modular PER C H710 Mini Blad e PER C H710 Adap ter/ Mini Mon olithi c PE RC H71 0P Ada pte r PER C H310 Adap ter/ Mini Blade /Mini Mon olithi c PERC H730P Adapt er/ Mini Monoli thic/ Mini Blades /Slim PERC H730 Adapt er/ Mini Monoli thic/ Mini Blades PERC H740P Adapt er/ Mini Monoli thic PERC H330 Adapte r/Mini Monolit hic/ Mini Blades / Embed ded PE RC H83 0 Ada pter PER C H840 Adap ter PERC FD33x
Virtual Disk Specif icatio n PE RC H8 00 PE RC H8 10 Ad apt er PERC H700 Adapter / Integrat ed/ Modular PER C H710 Mini Blad e PER C H710 Adap ter/ Mini Mon olithi c PE RC H71 0P Ada pte r PER C H310 Adap ter/ Mini Blade /Mini Mon olithi c PERC H730P Adapt er/ Mini Monoli thic/ Mini Blades /Slim PERC H730 Adapt er/ Mini Monoli thic/ Mini Blades PERC H740P Adapt er/ Mini Monoli thic PERC H330 Adapte r/Mini Monolit hic/ Mini Blades / Embed ded PE RC H83 0 Ada pter PER C H840 Adap ter PERC FD33x
Virtual Disk Specif icatio n PE RC H8 00 PE RC H8 10 Ad apt er PERC H700 Adapter / Integrat ed/ Modular PER C H710 Mini Blad e PER C H710 Adap ter/ Mini Mon olithi c PE RC H71 0P Ada pte r PER C H310 Adap ter/ Mini Blade /Mini Mon olithi c PERC H730P Adapt er/ Mini Monoli thic/ Mini Blades /Slim PERC H730 Adapt er/ Mini Monoli thic/ Mini Blades PERC H740P Adapt er/ Mini Monoli thic PERC H330 Adapte r/Mini Monolit hic/ Mini Blades / Embed ded PE RC H83 0 Ada pter PER C H840 Adap ter PERC FD33x
Virtual Disk Specif icatio n PE RC H8 10 Ad apt er PERC H700 Adapter / Integrat ed/ Modular PER C H710 Mini Blad e PER C H710 Adap ter/ Mini Mon olithi c PE RC H71 0P Ada pte r PER C H310 Adap ter/ Mini Blade /Mini Mon olithi c PERC H730P Adapt er/ Mini Monoli thic/ Mini Blades /Slim PERC H730 Adapt er/ Mini Monoli thic/ Mini Blades PERC H740P Adapt er/ Mini Monoli thic PERC H330 Adapte r/Mini Monolit hic/ Mini Blades / Embed ded PE RC H83 0 Ada pter PER C H840 Adap ter PERC FD33x D/ FD33x S P
Virtual Disk Specif icatio n PE RC H8 00 PE RC H8 10 Ad apt er PERC H700 Adapter / Integrat ed/ Modular PER C H710 Mini Blad e PER C H710 Adap ter/ Mini Mon olithi c PE RC H71 0P Ada pte r PER C H310 Adap ter/ Mini Blade /Mini Mon olithi c PERC H730P Adapt er/ Mini Monoli thic/ Mini Blades /Slim PERC H730 Adapt er/ Mini Monoli thic/ Mini Blades PERC H740P Adapt er/ Mini Monoli thic PERC H330 Adapte r/Mini Monolit hic/ Mini Blades / Embed ded PE RC H83 0 Ada pter PER C H840 Adap ter PERC FD33x
Virtual Disk Specification PERC H730P MX PERC H745P MX Maximum Number of Physical Disks in a RAID 50 256 256 Minimum Number of Physical Disks that can be Concatenated NA NA Minimum Number of Physical Disks in a RAID 0 1 1 Minimum Number of Physical Disks in a RAID 1 2 2 Minimum Number of Physical Disks in a RAID 5 3 3 Minimum Number of Physical Disks in a RAID 10 4 4 Minimum Number of Physical Disks in a RAID 50 6 6 Maximum Number of Physical Disks in a RAID 6 32 32 Maximum Number
RAID Level P E R C H 80 0 PE RC H81 0 Ada pte r PERC H700 Adapter/ Integrate d/ Modular PE RC H7 10 Mi ni Bla de RAID 10 Ye s Yes Yes RAID 50 Ye s Yes RAID 6 Ye s RAID 60 Ye s PERC H710 Adapt er/ Mini Monol ithic PE RC H71 0P Ada pte r PERC H310 Adapt er/ Mini Blade /Mini Monol ithic PERC H730P Adapter / Mini Monolit hic/ Mini Blades/ Slim PERC H730 Adapter / Mini Monolit hic/ Mini Blades PERC H740P Adapter / Mini Monolit hic PERC H330 Adapter / Mini Monolit hic/Mini Blades/ Embedd ed
Read, Write, Cache And Disk Cache Policy Supported By PERC Hardware Controllers Table 56.
Read, Write, and Cache Policy PE RC H8 00 PERC H810 Adapt er PER C H70 0 Ada pter / Inte grat ed/ Mod ular PERC H710 Adapt er/ Mini Mono lithic/ Mini Blade PER C H710 P Adap ter PER C H310 Adap ter/ Mini Blad e/ Mini Mon olithi c PERC H730P Adapte r/ Mini Monoli thic/ Mini Blades /Slim PERC H730 Adapte r/ Mini Monoli thic/ Mini Blades PER C H74 0P Adap ter/ Mini Mon olithi c PERC H330 Adapter / Mini Monolith ic/Mini Blades/ Embedd ed PERC H830 Adapt er PERC H840 Adapte r PERC PERC PERC FD33xD H
Read, Write, and Cache Policy PERC H730P MX PERC H745P MX Cache I/O No No Direct I/O No No Supported Features On The PERC Software RAID Controllers This section identifies the controller-supported features and whether or not an enclosure can be attached to the controller. The Software RAID controller include PERC S140.
NOTE: For physical disks connected to Software RAID S130 controller, 512 MB of disk space is by default used by the controller for metadata. Table 59. Controller Tasks Supported On The PERC S140 Controllers Controller Task Name PERC S140 Create Virtual Disk Yes Physical Disk Tasks Supported By The PERC Software RAID Controllers Table 60.
Virtual Disk Tasks Supported By The PERC Software Controllers Table 62.
Virtual Disk Task Name PERC S140 Blink/Unblink Yes Reconfigure Yes Change Policy Yes Delete Last Virtual Disk Yes Delete (any) Virtual Disk Yes Check Consistency Yes Disk Cache Policy Yes Virtual Disk Specifications For PERC Software RAID Controllers Table 64.
Virtual Disk Specification PERC S100 PERC S110 PERC S130 PERC S300 PERC S140 Maximum Number of Physical Disks in a RAID 5 8 4 10 8 8 Maximum Number of Physical Disks in a RAID 10 4 4 10 4 4 Minimum Number of Physical Disks that Can Be Concatenated NA NA NA NA NA Minimum Number of Physical Disks in a RAID 0 2 2 2 2 2 Minimum Number of 2 Physical Disks in a RAID 1 2 2 2 2 Minimum Number of Physical Disks in a RAID 5 3 3 3 3 3 Minimum Number of Physical Disks in a RAID 1
Virtual Disk Specification PERC S140 Minimum Number of Physical Disks in a RAID 5 3 Minimum Number of Physical Disks in a RAID 10 4 NOTE: When creating virtual disks using software RAID controllers, the information related to the physical disks linked to the virtual disk is enumerated or displayed on Storage Management after a short delay. This delay in displaying the information does not cause any functional limitation.
Read Write Cache And Disk Cache Policy Supported By The PERC Software RAID Controllers Table 68.
Read, Write, and Cache Policy PERC S140 Force Write Back (Enabled Always) No Write Cache Enabled Protected No Cache Policy No Disk Cache Policy No Cache I/O No Direct I/O No Enclosure Support On The PERC Software RAID Controllers Table 70.
21 Determining The Health Status For Storage Components The chapter describes how the status of lower-level storage components is “rolled up" into the combined status displayed for the controller or other higher-level component. The examples provided by these tables do not cover all scenarios, but they do indicate how status is rolled up when a particular component is in a healthy, degraded, or failed state.
Health Status Rollup - Physical Disks In A Virtual Disk Are Failed Or Removed Table 72. Health Status Rollup: Physical Disks in a Virtual Disk are Failed or Removed (Enclosures Not Included) Storage Subsystem Controller Battery Connector Physical Disk(s) Firmware/ Driver Virtual Disks Component Status Health Rollup Health Status Rollup - Physical Disks In A Virtual Disk Are Unsupported, Partially, Or Permanently Degraded Table 73.
Health Status Rollup - Some Physical Disks In A Virtual Disk Are In Foreign State Table 75. Health Status Rollup: Some Physical Disks in a Virtual Disk are in Foreign State (Enclosures Not Included) Storage Subsystem Controller Battery Connector Physical Disk(s) Firmware/ Driver Virtual Disk(s) Component Status Health Rollup Health Status Rollup - Virtual Disk Is Degraded, Physical Disks Are Failed Or Rebuilding Table 76.
Health Status Rollup - Unsupported Firmware Version Table 78. Health Status Rollup: Unsupported Firmware Version (Enclosures Not Included) Storage Subsystem Controller Battery Connector Physical Disk(s) Firmware/ Driver Virtual Disk(s) Component Status Health Rollup Health Status Rollup - Enclosure Power Supply Failed Or Power Connection Removed Table 79.
Health Status Rollup - Lost Both Power Connections To The Enclosure Table 81. Health Status Rollup: Lost Both Power Connections to the Enclosure Storage Subsystem Controller Connector Enclosure All Enclosure Components Component Status Health Rollup N/A Virtual Disks Physical Disks N/A N/A N/A N/A Health Status Rollup - One Or More Physical Disks Are Failed Table 82.
