CLI Guide

Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
controller number and ENCLOSUREID is the
enclosure number and n is the number of an
EMM. For example: controller=0
enclosure=2 info=emms index=1
Omreport Enclosure Slot Occupancy Report
The following table describes the syntax for the omreport Enclosure Slot Occupancy Report commands:
Table 100. Omreport Enclosure Slot Occupancy Report Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id enclosure=<ENCLOSUREID>
info=pdslotreport, where id is the controller
number and ENCLOSUREID is the enclosure
number. For example: controller=0
enclosure=2
Displays the empty and occupied slot details
for the specied enclosure.
NOTE: This command is not
supported on Blackplane, SCSI, and
SWRAID controllers.
Omreport Battery Status
The following table describes the syntax for the omreport Battery commands:
Table 101. omreport Battery Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage battery Displays all batteries present on all
controllers on the system (Some controllers
do not have batteries).
controller=id, where id is the controller
number. For example: controller=0
Displays the battery on the specied
controller.
controller=id battery=id, where id is the
controller number. For example: controller=0
Displays the specied battery.
Omreport Global Information
The following table describes the syntax for the omreport Global Information commands:
142
Omreport storage commands