CLI Guide

Event Name Description

event=enclosurefail Sets actions when an enclosure detects a failure value.

event=storagectrlbatterywarn

Sets actions when a storage controller battery detects a warning value.

NOTE: This event is not available on blade systems.

event=storagectrlbatteryfail

Sets actions when a storage controller battery detects a failure value.

NOTE: This event is not available on blade systems.

Example Set Alert Action Commands

The following are examples of valid example commands. For each successful command issued, the following message is displayed:

Alert action(s) configured successfully.

Example Current Probe Actions

To disable system console alert if a current probe detects a warning event, type:

omconfig system alertaction event=currentwarn alert=false

omconfig servermodule alertaction event=currentwarn alert=false

To enable broadcast messages if a current probe detects a failure event, type:

omconfig system alertaction event=currentfail broadcast=true

omconfig servermodule alertaction event=currentfail broadcast=true

Example Fan Probe Actions

To generate alerts when a fan probe detects a failure value, type:

omconfig system alertaction event=fanfail alert=true

omconfig servermodule alertaction event=fanfail alert=true

Example chassis intrusion actions

To clear all alert actions for chassis intrusion, type:

omconfig system alertaction event=intrusion clearall=true

omconfig servermodule alertaction event=intrusion clearall=true

Omcong

Managing Components Using The Instrumentation Service 113