Dell EMC OpenManage Version Port Information Guide Version 9.1 February 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Introduction................................................................................................................. 4 Accessing support content from the Dell EMC support site.................................................................................... 4 Other Documents You May Need.................................................................................................................................... 4 Contacting Dell EMC.......................................
1 Introduction The Dell EMC OpenManage Port Information document helps system administrators and technicians to identify the ports used by the Dell EMC OpenManage systems management software, standard operating system services, and other agent applications.
● The Dell EMC OpenManage Server Administrator CIM Reference Guide documents the Common Information Model (CIM) provider, an extension of the standard management object format (MOF) file. The CIM provider MOF documents supported classes of management objects. ● The Dell EMC OpenManage Server Administrator Messages Reference Guide lists the messages that are displayed in your Server Administrator home page Alert log or on your operating system’s event viewer.
2 Ports The following tables list the ports used by the OpenManage systems management software, standard operating system services and other agent applications. NOTE: Ports with the correct configuration are necessary to allow OpenManage systems management software to connect to a remote device through firewalls. NOTE: The systems management software version mentioned indicates the minimum version of the product required to use that port. NOTE: CIM ports are dynamic.
OpenManage Essentials Management Stations Table 1. Supported Protocols and Ports on Management Stations Port Numbe r Protocol Port Type Maximum Encryption Level Direction Usage 25 SMTP TCP None In/Out Optional email alert action 162 SNMP UDP None In Event reception through SNMP 1433 Proprietary TCP None In/Out Optional remote SQL server access 2607 HTTPS TCP 128-bit SSL In/Out Web GUI 1278 HTTP TCP None In/Out To launch OME console over HTTP Managed Nodes Table 2.
Table 2.
Table 3. Supported Protocols and Ports (continued) Port Number Protocols Port Type Maximum Direction Encryption Level Usage Configurable 636 LDAP TCP SSL Out LDAPS, Active Directory client Yes 3269 LDAP TCP None Out Active Directory client No 8081 HTTP TCP None Out Link and Launch to FN-IOA, MXL-IOA No * — When a DHCP client connects to a DHCP server, the source port is 68 and the destination port is 67.
Managed Nodes Table 5.
Table 6. Supported Protocols and Ports (continued) Port Number Protocols Port Type Direction Usage Configurable software update feature (for Windows operating systems). 161 SNMP UDP In/Out SNMP query management No 162 SNMP UDP Out SNMP trap event No 443 HTTPS TCP In/Out Remote Management using Web Server to connect to OpenWSMAN/WinRM) Yes 1311 HTTPS TCP In/Out Server Administrator Web GUI Yes Random Port Number Proprietary TCP In/Out On localhost/127.0.0.1 only.
Table 8. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP 8.1 None Out SNMP trap event No 1024-65535 (Dynamically assigned) DCOM TCP/UDP 7.x, 8.x None In/Out Monitoring and configuration through WMI OpenManage Baseboard Management Utility Table 9.
Table 10. Supported Protocols and Ports (continued) Port Number Protoco Port l Type 53, 80, 135, 137, 139, 150, 1433, 2500 80 Maximum Encryption Level Directio Usage n TCP HTTP 135, 137, 139, 445 135 Versio n TCP Symantec Console — Console using a remote computer 1.x – 2.0.3 None In/Out TCP/UD P RPC/ DCOM 138 Configurable Application launch — PowerConnect No Console Non-HTTP communications (for example, client package download using UNC) TCP/UD 1.x – P 2.0.
Table 10. Supported Protocols and Ports (continued) Port Number Protoco Port l Type 4952 Versio n Maximum Encryption Level Directio Usage n TCP 6389 Propriet ary TCP Configurable Deployment Solutions communication used for managing the connection drops 1.x – 2.0.
Managed Node Table 12. Supported Protocols and Ports on Managed Nodes Port Number Protocol Port Type Maximum Encryption Level Direction Usage 22 SSH TCP 256–bit AES In/Out Non-Dell chassis communication 161 SNMP Agent UDP 56-bit DES In/Out SNMP query management 443 WSMAN TCP 256-bit AES In/Out Chassis communication 623 RMCP/RMCP+ UDP 128-bit AES In/Out IPMI access over LAN Dell Lifecycle Controller Integration for System Center Configuration Manager Table 13.
Dell Lifecycle Controller Integration for System Center Virtualization Machine Manager Table 15.
Dell Management Pack for System Center Operation Manager Table 18.
Table 21. Managed Node (continued) Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP None Out Hardware SNMP Events No 2463 SymbolSDK TCP None In PowerVault MD Array Communication No 1311 HTTP/ HTTPS TCP None In/Out OMSA Web Console No 8543 HTTP TCP None Out DCLM Communication No 8544 HTTP TCP None Out DCLM Web Server Console Launch No OpenManage Connection for IBM Tivoli Network Manager Table 22.
OpenManage Connection for IBM Tivoli Netcool OMNIbus Table 24. Management Station Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP In Event reception through SNMP No None Table 25.
iDRAC Service Module Table 28. Supported Protocols and Ports Port Number Protocols Port Type 1266 WSMAN, GUI, TCP Redfish and remote RACADM over HTTPS Direction Usage Configurable In/Out iDRAC Service Module’s feature, Yes iDRAC access via Host OS, uses the default port 1266 on Microsoft Windows and Linux operating systems to provide access to iDRAC interfaces (WSMAN, GUI, Redfish and remote RACADM) using https://hostname:1266 as the base URL. iDRAC7 and iDRAC8 Table 29.
iDRAC6 for Rack and Tower Servers Table 31. Supported Protocols and Ports Port Number Protocols Configurable 22 SSH Yes 23 Telnet Yes 25 SMTP No 53 DNS No 68 DHCP-assigned IP address No 69 TFTP No 80 HTTP Yes 161 SNMP Agent No 162 SNMP Trap No 443 HTTPS Yes 623 RMCP/RMCP+ No 636 LDAPS No 5900 Virtual Console/Virtual Media Yes 3269 LDAPS for global catalog (GC) No iDRAC for Blade Servers Table 32.
Table 32. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configura ble 443 HTTPS TCP 1.0 128-bit SSL In/Out Web management GUI Yes 623 RMCP/ RMCP+ UDP 1.0 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.0 128-bit SSL In/Out Optional ADS authentication No 3269 LDAPS for global catalog (GC) TCP 1.0 128-bit SSL In/Out Optional ADS authentication No 3668, 3669 Virtual Media Service TCP 1.
Table 33. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable through Trivial FTP 80 HTTP TCP 1.0 None In/Out Redirected to HTTPS Yes 162 SNMP trap UDP 1.0 None Out SNMP trap event No 443 HTTPS TCP 1.0 128-bit SSL In/Out Web management CLI Yes 623 RMCP/ RMCP+ UDP 1.0 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.
Digital KVM Table 35. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 2068 Proprietary TCP 1.0 128-bit SSL In/Out Video No redirection — keyboard/ mouse 3668 Proprietary TCP 1.0 None In/Out Virtual Media No 8192 Proprietary TCP 1.0 None In/Out Video redirection to client viewer No DRAC 5 Table 36.
Table 36. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable GUI and remote racadm CLI utility 623 RMCP/ RMCP+ UDP 1.0 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.0 128-bit SSL In/Out Optional ADS No authentication 3269 LDAPS for global catalog (GC) TCP 1.0 128-bit SSL In/Out Optional ADS No authentication 3668 Proprietary TCP 1.
Table 37. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 68 DHCP UDP 1.0 None In/Out DHCP assigned IP address No 69 TFTP UDP 1.0 None In/Out Firmware update through Trivial FTP No 80 HTTP TCP 1.0 None In/Out Web GUI redirected to HTTPS Yes 161 SNMP Agent UDP 1.0 None In/Out SNMP query management No 162 SNMP UDP 1.0 None Out SNMP trap event No 443 HTTPS TCP 1.
