Users Guide

To Locate Change Controller Properties In Storage Management - Method

1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects.

2 Select a controller object.

3 Click Information/Conguration on the controller Properties page.

4 Select Change Controller Properties ... from the Controller Tasks drop-down menu.

5 Click Execute.

Managing The Physical Disk Power

Does my controller support this feature? See Supported Features.

The Manage Physical Disk Power task allows you to manage the power consumed by the physical disks.

NOTE: The Manage Physical Disk Power task is provided with H330 cards by spinning down the hot spares and uncongured

disks. PERC H730P, H730, H740P, and H840 cards also support the Manage Physical Disk Power task with additional power-

saving modes, Spin Down Congured Drives, and Automatic Disk Power Saving (Idle C) options.

NOTE: This task is not supported on PERC hardware controllers running in HBA mode.

You can enable one of the following modes to manage the power consumed:

• No Power Savings Mode — This is the default mode for the controller. In this mode, all power-saving features are disabled.

• Balanced Power Savings Mode — Provides good power savings while limiting I/O latency.

• Maximum Power Savings Mode — Provides maximum power savings for all drives.

• Customized Power Savings Mode — Allows you to customize the power-saving settings. The default values are populated when you

select this power mode. You can select or clear the features you want to enable. You can select Quality of Service (QoS) to customize

power saving on congured drives by setting the Start Time and Time interval to spin up.

To enable the Quality of Service (QoS) feature:

1 Select Customized Power Savings Mode.

2 Select Enable for the Spin Down Congured Drives option