Users Guide
NOTE: The rmware and drivers listed in the
Server Administrator Release Notes
, see the minimum supported version for these
controllers. Later versions of the rmware and drivers are also supported. For the most recent driver and rmware requirements,
contact your service provider. The controller properties can vary depending on the model of the controller.
Table 11. Controller Properties
Property Denition
ID Displays the ID assigned to the controller by Storage Management.
Storage Management numbers the controllers attached to the
system starting with zero. This number is the same as the controller
ID number reported by the omreport CLI Command. For
information on Command Line Interface, see the Server
Administrator Command Line Interface User’s Guide.
Status These icons represent the severity or health of the storage
component.
For more information, see Storage Component Severity.
• — Normal/OK
• — Warning/Non-critical
• — Critical/Failure/Error
Name Displays the name of the controller.
NOTE: For PowerEdge FD332 storage sled, the name is
displayed as:
• Single controller — PERC FD33xS (Integrated RAID
Controller <X> in Front Chassis Slot <Y>, where X
displays the controller number and Y displays the front
chassis slot number.
• Dual controller — PERC FD33xD (Integrated RAID
Controller <X> in Front Chassis Slot <Y>, where X
displays the controller number and Y displays the front
chassis slot number.
Slot ID Displays the slot to which the controller is attached. For PowerEdge
FD332 storage sled, the name is displayed as: PCI Slot <Y> <X>,
where Y displays the front chassis slot number and X displays the
controller number.
NOTE: You can also identify the slot ID by selecting the
System > Main > System Chassis > Slots object and
clicking the Information tab.
State Displays the status of the controller. Possible values are:
• Ready — The controller is functioning normally.
• Degraded — The controller has encountered a failure and is
operating in a degraded state.
• Failed — The controller has encountered a failure and is no
longer functioning.
Firmware Version Displays the version of the rmware that is installed on the
controller.
56 Controllers