Users Guide

PERC S140 Support On Non-Volatile Memory Express Devices
PERC S140 support on NVMe devices allows you to create RAID volumes or virtual disks on PCIe SSD devices connected with a PERC
S140 controller.
NOTE: This feature does not support NVDIMM's.
The features supported by PERC S140 on NVMe devices are mentioned below:
• Enumerating virtual disks on NVMe
• Deleting virtual disks on NVMe
• Booting virtual disks on NVMe
• Importing foreign conguration on NVMe - Automatically imported by the software RAID controller.
• Assigning Hot Spare devices on NVMe
• Converting Non-RAID NVMe devices to RAID
• Prepare to Remove - non RAID NVMe devices
Virtual Disk Tasks Supported By The PERC Software
Controllers
Table 59. Virtual Disk Tasks Supported by the PERC S100, PERC S110, PERC S130, and S300 Controllers
Virtual Disk Task
Name
PERC S100 PERC S110 PERC S130 PERC S300
Assign and Unassign
Dedicated Hot Spare
Yes Yes Yes Yes
Create Virtual Disk Yes Yes Yes Yes
Create Virtual Disk
Advanced Wizard
Yes Yes Yes Yes
Create Virtual Disk
Express Wizard
Yes Yes Yes Yes
Rename Yes Yes Yes Yes
Blink/Unblink No Yes Yes No
Recongure Yes Yes Yes Yes
Change Policy Yes Yes Yes Yes
Delete Last Virtual
Disk
Yes Yes Yes Yes
Delete (any) Virtual
Disk
Yes Yes Yes Yes
Check Consistency Yes Yes Yes Yes
Disk Cache Policy No No Yes No
206 Supported Features