Users Guide
• Storage Management May Delay Before Updating Temperature Probe Status
• Storage Management May Delay Displaying Storage Devices After Reboot
• You Are Unable To Log Into A Remote System
• Cannot Connect To Remote System Running Microsoft Windows Server 2003
• Reconguring A Virtual Disk Displays Error In Mozilla Browser
• Physical Disks Are Displayed Under The Connector Object Instead Of The Enclosure Object
Physical Disk Is Oine Or Displays An Error Status
A physical disk may display an error status if it has been damaged, is oine, or was a member of a virtual disk that has been deleted or
initialized. The following actions may resolve the error condition:
• If a user has changed the status to Oine, then return the disk to Online status by performing the Online disk task.
• Investigate whether there are any cables, enclosure, or controller problems preventing the disk from communicating with the controller.
If you nd a problem and resolve it and disk does not return to Online or Ready status, reboot the system.
• If the disk is damaged, replace it.
Related link
Replacing A Failed Disk
Receive A Bad Block Alert With Replacement, Sense, Or
Medium Error
The following alerts or events are generated when a portion of a physical disk is damaged:
• 2146
• 2147
• 2148
• 2149
• 2150
This damage is discovered when the controller performs an operation that requires scanning the disk. Examples of operations that may
result in these alerts are as follows:
• Consistency check
• Rebuild
• Virtual disk format
• I/O
If you receive alerts 2146 through 2150 as the result of performing a rebuild or while the virtual disk is in a degraded state, then data cannot
be recovered from the damaged disk without restoring from the backup. If you receive alerts 2146 through 2150 under circumstances other
than a rebuild, then data recovery may be possible. The following describes each of these situations.
176
Troubleshooting